1995 ej18 to 1996 ej20t?
04-23-2005, 01:14 PM
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: east bum Maine
Posts: 18
Car Info: 99 L- wagon
1995 ej18 to 1996 ej20t?
would this swap be fairly plug and play kinda thing or will it be alot of wiring sorry im new just trying to figure somethings out before i start saving
05-02-2005, 08:47 PM
#2
Registered User
Join Date: Sep 2004
Posts: 49
that would be a lot of wiring, but do start saving though. sooner the better. This is, after all, the most expensive hobby in the world except for maybe yacht racing or blimping or skeet shooting gold bars -actually about the same as skeet shooting gold bars
may God bless your project
may God bless your project
Last edited by ac_attack; 05-02-2005 at 08:52 PM.
05-26-2005, 11:21 AM
#3
Registered User
Join Date: Apr 2004
Location: Cape Coral, FL
Posts: 272
Car Info: 1993 Impreza L EJ20 Turbo FWD
im doing it, unfortunately, my harness was cut, and it didnt come with the harness part that plugs into the ecu, the 1.8 only has 3 plugs into the ecu, and the 1996WRX ECU has 4 ports. so this must be figured out.
does anyone know where to buy the harness' at or what other car might have a similar harness.
I found the pinout for the WRX ecu, but its not color coded. I need that.
does anyone know where to buy the harness' at or what other car might have a similar harness.
I found the pinout for the WRX ecu, but its not color coded. I need that.
Thread
Thread Starter
Forum
Replies
Last Post
Drimmie
Engine/Power - non turbo (All non turbo Imprezas)
0
07-17-2008 11:53 AM
My_Red_Suby
Engine/Power - EJ20T (pre-2006 WRX and JDM)
22
10-26-2004 10:24 AM
