EQ Tuning built 2007 STI

Thread Tools
 
Search this Thread
 
Old Apr 6, 2012 | 06:18 PM
  #1  
2fst4chp's Avatar
Thread Starter
Registered User
iTrader: (2)
 
Joined: Feb 2011
Posts: 172
From: Bay Area
Car Info: 2005 STI
EQ Tuning built 2007 STI

Hey guys!

I know i posted before but this time its for real... time to part ways with my baby. Just a time in my life that I have to set some priorities so the sti has to go. (just sold my 2009 r6 Raven this past week)

Im posting this pretty quick while im at work so ill update as i go and will have pictures up by monday 4/9

Basically bought the car 2/1/2011 from a Toyota dealership here in the Sacramento area with about 46k miles on the car and i ended up blowin the motor on the way to socal and the car had about 53k miles on it 6/3/2011. Ended up calling Ed over at EQ Tuning and he ended up building the motor and pretty much doing all the work that had been done to the car. As the car sits there is about 58.5k miles on it.

You will see, when i post the pictures, that the car basically look like a wingless bone stock sti. It does have a few scratches along the car and a cracked windshield but nothing bad at all

Here is a quick list of everything done as it sits:

-EQ stage 1 block minus the #3 cylinder
-EQ stage 1 head
-FP 68HTA turbo
-Ebay tmic heat treated
-Cobb ap
-Perrin inlet
-APS 70mm cai
-Hallman mbc
-TurboXS stealth back w/g200 3" axle back
-Perrin el headers
-Cosworth air bump Delete
-NGK one step colder spark plugs
-Walboro 255
-DW 1300cc injectors
-Grimspeed TGV deletes
-RPS clutch
-RPM cassis brace
-Perrin 25mm front sway
-EQ custom e85 tune

With all this done the cars is putting down 23whp and 31wtq on EQ's dyno witch reads low like a mustang

I have all receipts for all the work that has been done on the car since ive owned it and adding up to about 15k worth or work! And when the motor was rebuilt the water pump and timing belt were replaced

Asking price is $3.75 and a chipotle burrito

Looking to trade for something that will move under its own power

Feel free to ask if u have any questions

Last edited by 2fst4chp; Aug 1, 2012 at 10:44 AM.
Old Apr 8, 2012 | 05:02 PM
  #2  
bobb126's Avatar
Registered User
iTrader: (1)
 
Joined: Jan 2010
Posts: 1,345
From: Sacramento
Car Info: '01 GC8 & '96 OBS
glws dude I always loved your car, very fast and looked completely stock
Old Apr 24, 2012 | 03:29 PM
  #3  
stupidchicken03's Avatar
Churro Aficionado
iTrader: (38)
 
Joined: Feb 2008
Posts: 54,661
From: IG - @thomas.teammoist
Car Info: IG - @TEAMMOISTOFFICIAL
are you still selling?
I heard you had motor issues??
Old Apr 24, 2012 | 03:42 PM
  #4  
EQ Tuning's Avatar
iClub Silver Vendor
iTrader: (12)
 
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop
Car had a failed head gasket (first time after over 100 built engines here). Its currently being fixed under warranty at no expense to the customer. Meanwhile, we inspected the rest of the engine and everything else looks perfect.

Thanks
-- Ed
Old Apr 24, 2012 | 03:48 PM
  #5  
stupidchicken03's Avatar
Churro Aficionado
iTrader: (38)
 
Joined: Feb 2008
Posts: 54,661
From: IG - @thomas.teammoist
Car Info: IG - @TEAMMOISTOFFICIAL
Originally Posted by EQ Tuning
Car had a failed head gasket (first time after over 100 built engines here). Its currently being fixed under warranty at no expense to the customer. Meanwhile, we inspected the rest of the engine and everything else looks perfect.

Thanks
-- Ed
So just new head gaskets are being done? Nothing else?
Old Apr 24, 2012 | 04:07 PM
  #6  
tofuman's Avatar
VIP Member
iTrader: (31)
 
Joined: Oct 2007
Posts: 1,709
From: Sacramento, CA
Car Info: a blue car
What about bearings?
Old Apr 24, 2012 | 04:23 PM
  #7  
EQ Tuning's Avatar
iClub Silver Vendor
iTrader: (12)
 
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop
Originally Posted by stupidchicken03
So just new head gaskets are being done? Nothing else?
Along with surfacing the block and heads and inspection of block, bearings, and rings. So far everything has checked out perfect except the failed head gasket.

Thanks
-- Ed
Old Apr 24, 2012 | 04:24 PM
  #8  
EQ Tuning's Avatar
iClub Silver Vendor
iTrader: (12)
 
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop
Originally Posted by tofuman
What about bearings?
The bearings looked perfect but we will verify the clearances upon re-assembly as well.

Thanks
-- Ed
Old Apr 25, 2012 | 12:03 AM
  #9  
STINGR5's Avatar
Registered User
 
Joined: Dec 2011
Posts: 28
From: NORCAL
Car Info: sti
Originally Posted by EQ Tuning
Car had a failed head gasket (first time after over 100 built engines here). Its currently being fixed under warranty at no expense to the customer. Meanwhile, we inspected the rest of the engine and everything else looks perfect.

Thanks
-- Ed
This is good customer service, not more to be said!

Ron
Old Apr 25, 2012 | 09:59 AM
  #10  
EQ Tuning's Avatar
iClub Silver Vendor
iTrader: (12)
 
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop
Originally Posted by STINGR5
This is good customer service, not more to be said!

Ron
Thanks Ron. We stand behind our work and always take care of our customers!

-- Ed
Old Apr 27, 2012 | 05:12 PM
  #11  
2fst4chp's Avatar
Thread Starter
Registered User
iTrader: (2)
 
Joined: Feb 2011
Posts: 172
From: Bay Area
Car Info: 2005 STI
Originally Posted by stupidchicken03
are you still selling?
I heard you had motor issues??
I haven't checked iclub in awhile. The car will still be for sale. When I get it back ill post pictures and more details.
Old May 31, 2012 | 10:43 PM
  #12  
stupidchicken03's Avatar
Churro Aficionado
iTrader: (38)
 
Joined: Feb 2008
Posts: 54,661
From: IG - @thomas.teammoist
Car Info: IG - @TEAMMOISTOFFICIAL
Have you got the car back yet? Its been over a month
Old Jun 1, 2012 | 11:51 AM
  #13  
stupidchicken03's Avatar
Churro Aficionado
iTrader: (38)
 
Joined: Feb 2008
Posts: 54,661
From: IG - @thomas.teammoist
Car Info: IG - @TEAMMOISTOFFICIAL
No word from Chris or EQ??

Originally Posted by EQ Tuning
Car had a failed head gasket (first time after over 100 built engines here). Its currently being fixed under warranty at no expense to the customer. Meanwhile, we inspected the rest of the engine and everything else looks perfect.

Thanks
-- Ed
If its fixed under warranty and the customer doesnt have to pay, does that mean it will take 4+ weeks to get it back?
Old Jun 1, 2012 | 12:24 PM
  #14  
Brfatal's Avatar
Technical Know-It-All
 
Joined: Oct 2003
Posts: 2,123
From: Sterling, VA
Car Info: '02 WRX + '15 WRX
Originally Posted by EQ Tuning
Thanks Ron. We stand behind our work and always take care of our customers!

-- Ed
That's great to hear. 90% of shops will tell you to bugger off even when it's clearly an problem with the build, including many of the "big" name shops. I wish my motors had been built by you guys.

Originally Posted by stupidchicken03
If its fixed under warranty and the customer doesnt have to pay, does that mean it will take 4+ weeks to get it back?
4+ weeks is a very fast build, from experience. I've had 2 engines take 6 or 7 weeks, one 8 months, one 4 weeks, and the most recent one a few days over 1 year.

I'm assuming this tune was done on meth as well?

Last edited by Brfatal; Jun 1, 2012 at 12:33 PM.
Old Jun 1, 2012 | 01:27 PM
  #15  
stupidchicken03's Avatar
Churro Aficionado
iTrader: (38)
 
Joined: Feb 2008
Posts: 54,661
From: IG - @thomas.teammoist
Car Info: IG - @TEAMMOISTOFFICIAL
Originally Posted by Brfatal

4+ weeks is a very fast build, from experience. I've had 2 engines take 6 or 7 weeks, one 8 months, one 4 weeks, and the most recent one a few days over 1 year.

I'm assuming this tune was done on meth as well?
Its not like it was a fresh build.. the motor had issues and it was brought back. Should be checked out disassembled/reassembled as needed. Why would that take over a month? And im going off a month from when i heard about it.. i dont know how long the car was down before then too



All times are GMT -7. The time now is 12:35 PM.