Norcal i-club truck thread
Registered User
iTrader: (17)
Joined: Nov 2009
Posts: 2,501
From: CA
Car Info: WRB 03(sold) AW 03(sold) 02 Taco!
Sold the subaru to get into another taco
2002 3.4l 5 speed 4x4 extended cab:
Toytec "ultimate" 3'' kit
Total chaos 2'' shackles
Flipped u-bolts
Total Chaos UCA
Fabtech front subframe
Downey headers
Gutted magnaflow catback
TRD supercharger
Custom sliders
Custom f/r bumpers
33x1150x15 BFG km2s
Going to go SAS when I get into another Suby but for now it's staying IFS. I love these trucks!
2002 3.4l 5 speed 4x4 extended cab:
Toytec "ultimate" 3'' kit
Total chaos 2'' shackles
Flipped u-bolts
Total Chaos UCA
Fabtech front subframe
Downey headers
Gutted magnaflow catback
TRD supercharger
Custom sliders
Custom f/r bumpers
33x1150x15 BFG km2s
Going to go SAS when I get into another Suby but for now it's staying IFS. I love these trucks!
Or you can hunt around pirate4x4 and buy someones already overbuilt tank of a truck for 4000 and go beat the crap out of it.
So what does everyone say...4x4 run this winter, snow run to the rubicon and back out (say..ice house road, camp and head back the next day?)
Registered User
iTrader: (8)
Joined: Aug 2008
Posts: 1,161
From: San Mateo, Cali
Car Info: 06 GMC Diesel
Lol thx Hide

2006 GMC 2500HD SLT3 CCSB
4" Tough country lift
35" BFG KO's
5" Flow pro exhaust, 8" tip

Airdog 165 Fuel pump
Fully built trans, PPE Deep pan and rear diff
EFI Live tune 550hp/1100tq
Waiting to Install this weekend are
Merchant auto Engine mounts ( Broke one on a 4wd lauch lol )
Cognito Pitman and Idler arm support kit ( See photo below, you'll know why )
Moog Pitman and Idler arms


Registered User
iTrader: (8)
Joined: Aug 2008
Posts: 1,161
From: San Mateo, Cali
Car Info: 06 GMC Diesel
Hence the reason for my parts that I'll Install this weekend. Also I was dumb enough to leave my front end that high when I was pullin the sled, shoulda lowered It down to keep my front end from lookin like that. but yeah my wheel are looking in different directions haha, Kinda bummed I didn't get to drag that sled the whole way lol next time I'll be better prepaired.
Thanks Jody, How did that trunk clean up for you? I think I still have spiders In my truck from having that thing sit In my back seat for 2 weeks haha
The guy that did the work on my truck said with my setup It should run Mid to high 12's with the 35's on it, His truck has twins on It and has 100 more hp then mine and runs Mid to low 11's all day long lol, you havent lived till you feel a 7,000lb truck launch at 30psi and still break all 4 tires loose
Last edited by 07wrx4life; Oct 12, 2011 at 10:21 PM.
i have the same issues with my kit. when going WOT and in 4 wheel drive, the front end lifts or unweighs and when the wheel droop, my kit looks like each tire is turning in at 45 degrees inwards...
Registered User
iTrader: (5)
Joined: Jun 2011
Posts: 417
From: Concord, CA
Car Info: Flared 2007 STI, EQ built and tuned
2001 silverado
K&N CAI
JBA headers
Jet MAF (just for looks)
it doesn't do sh*t
superchips reprogramer
front and rear swaybars
flowmaster 40 single 3" w/ turn down
K&N CAI
JBA headers
Jet MAF (just for looks)
it doesn't do sh*tsuperchips reprogramer
front and rear swaybars
flowmaster 40 single 3" w/ turn down
[QUOTE=07wrx4life;3149516]Lol thx Hide 
2006 GMC 2500HD SLT3 CCSB
4" Tough country lift
35" BFG KO's
5" Flow pro exhaust, 8" tip
Airdog 165 Fuel pump
Fully built trans, PPE Deep pan and rear diff
EFI Live tune 550hp/1100tq
Waiting to Install this weekend are
Merchant auto Engine mounts ( Broke one on a 4wd lauch lol )
engine mounts for the duramax our on my list to design and have in production. Also have gaskets here to draw up flanges in solidworks and start working on aftermarket turbo setups for the duramax.

2006 GMC 2500HD SLT3 CCSB
4" Tough country lift
35" BFG KO's
5" Flow pro exhaust, 8" tip

Airdog 165 Fuel pump
Fully built trans, PPE Deep pan and rear diff
EFI Live tune 550hp/1100tq
Waiting to Install this weekend are
Merchant auto Engine mounts ( Broke one on a 4wd lauch lol )
engine mounts for the duramax our on my list to design and have in production. Also have gaskets here to draw up flanges in solidworks and start working on aftermarket turbo setups for the duramax.
Nobody likes the tuna here
iTrader: (51)
Joined: Feb 2010
Posts: 19,779
From: Somewhere San Mateo County, Inside A 911 Ambulance
Car Info: 03 SRP WRX Street Class Prepped, 17 Chevy Duramax
Sold my taco and picked up a 6 spd full time 4wd FJ. The thing is a tank! Getting Icon lift soon and 33" tires. Also armoring up with sliders, underbody skids and steel bumpers. Can't wait to go wheeling in this truck.



