I'm in the middle of DIY painting sideskirts, question guys!
Thread Starter
Registered User
iTrader: (12)
Joined: Jul 2003
Posts: 3,150
From: Palo Alto
Car Info: GT35R, Meth
I'm in the middle of DIY painting sideskirts, question guys!
Hey all,
I sanded with 80, 220, 600 grit paper,
I've sprayed on 2 coats of primer, sanded and sprayed 4 coats of paint and 2 coats of clear so far.
Though there are some uneven parts, and I'm wondering if it's not too late to sand out with some 600 grit. And then put
©¿£z£}££ £z¥W£v
a few more coats of clear on top?
Ambert Ho
I sanded with 80, 220, 600 grit paper,
I've sprayed on 2 coats of primer, sanded and sprayed 4 coats of paint and 2 coats of clear so far.
Though there are some uneven parts, and I'm wondering if it's not too late to sand out with some 600 grit. And then put
©¿£z£}££ £z¥W£v
a few more coats of clear on top?
Ambert Ho
VIP Member
iTrader: (2)
Joined: Nov 2002
Posts: 3,639
From: Longing for my ol' white '02 WRX :(
Car Info: 2016 Acura RDX ... meh. Um, nice subwoofer?
Sounds like your sanding way more than you need to heh.
What I'd be more concerned about... although its a bit too late, is having adhersion promoter under all that paint.
The more clear coat, the smoother it will look. Try not to do them too far apart (timewise) so they melt into eachother.
jason
What I'd be more concerned about... although its a bit too late, is having adhersion promoter under all that paint.
The more clear coat, the smoother it will look. Try not to do them too far apart (timewise) so they melt into eachother.
jason
VIP Member
iTrader: (2)
Joined: Nov 2002
Posts: 3,639
From: Longing for my ol' white '02 WRX :(
Car Info: 2016 Acura RDX ... meh. Um, nice subwoofer?
Whew, re: adhesion promotor. Too late now I guess hehehe... but not more than 15 minutes after its dry to the touch. I just usually don't let it cure.
Thread
Thread Starter
Forum
Replies
Last Post
tekgnosis
Engine/Power - EJ20T (pre-2006 WRX and JDM)
14
Sep 7, 2006 05:21 AM