ok guys i have a problem.. i did the jdm tail light mod... and now my brake light sdont work PROPERLY!.... ok so... when i swaped the bulbs around, the bulbs light up propperly but when i depress the brakes they stay the same they dont get any brigther. i have now fixed the drivers side as i dont know how i did it... but the passenger side is still not working properly.. any help would be apreciated. btw are the brake lights supose to be double filament or single?

 

My friend Ave had the same problem with his passenger side taillight, our friend Daios check all the wiring and everything looked good, but still didn't work, so he just got a new harness and it works fine now
Ps-06/07 harness works too.

 

JDM y0

 

my problem was that my passenger brake light wouldnt light up when i press the brakes, only the driver side lit up.

as what wagontale said, i used an 06 tail light harness and worked out fine.

hope you get everything working.

 

would anyone happen to have a spare harness i could use to test out? or possibly have or buy?

 

Mines worked out fine when i swapped everything out...Though the wires had to stretch alittle..GL

 

hmm maybe it might just be my light bulbs then.. i gota go buy one tomorrow to test it out

 

try swapping the passenger harness with the driver side. if the bulbs dont work then it could be the harness which is what happend in my case.

 

Don't need to buy new bulbs, just swap bulbs from another socket before you buy new ones, good luck man,keep us posted