Exhaust install san jose
#16
Registered User
#17
a 2 ton wheel jack
2 jack stands
ratchet set w/ possibly breaker bar or steel pipe to get some leverage
annnnd that's pretty much it? follow online instructions, plenty o youtube.
tools i use for making life easy:
4 wheel ramps
2 jack stands for safety
a 2 ton wheel jack
digital torque wrench & ratchets
some wd40 & exhaust hanger remover.
easily less than an hour job.
Otherwise, i'd take it to Andy's
"HE's a swell guy" Story:
I went to andy's to get a custom muffler installed. He did all the handy work, even removed my resonator. Paid the guy & I loved it for a few days, then found the droning to be horrible. came back to have resonator reinstalled. he reinstalled, free of charge. fast forward a few weeks later and the droning is still bugging me. ended up swapping back to stock. he completely understood and did all the welding work to swap back to stock, and did it for free When i asked midas to do it cuz they were closer, they wanted $200.
#20
If in doubt, FLAT OUT
iTrader: (33)
Join Date: Oct 2010
Location: Nor Cal SJ
Posts: 7,035
Car Info: 2010 Hatch, 2011 Sedan
tools required:
a 2 ton wheel jack
2 jack stands
ratchet set w/ possibly breaker bar or steel pipe to get some leverage
annnnd that's pretty much it? follow online instructions, plenty o youtube.
tools i use for making life easy:
4 wheel ramps
2 jack stands for safety
a 2 ton wheel jack
digital torque wrench & ratchets
some wd40 & exhaust hanger remover.
easily less than an hour job.
a 2 ton wheel jack
2 jack stands
ratchet set w/ possibly breaker bar or steel pipe to get some leverage
annnnd that's pretty much it? follow online instructions, plenty o youtube.
tools i use for making life easy:
4 wheel ramps
2 jack stands for safety
a 2 ton wheel jack
digital torque wrench & ratchets
some wd40 & exhaust hanger remover.
easily less than an hour job.
Thread
Thread Starter
Forum
Replies
Last Post
sonic_yellow
Bay Area
58
01-15-2008 06:00 PM