EQ Tuning News and Updates!
Thread Starter
iClub Silver Vendor
iTrader: (12)
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop
Registered User
iTrader: (5)
Joined: Apr 2007
Posts: 1,662
From: Sebastopol, CA
Car Info: '04 PSM Sti
Last edited by crfsti; Apr 24, 2011 at 05:36 PM.
Thread Starter
iClub Silver Vendor
iTrader: (12)
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop
Last night we finalized the tune on our first EQ Built block 
This is an 05 STI with the following:
EQ Tuning Stage 1 Shortblock
Stock STI heads/cams with 5 angle valve job
Blouch DOM 3.0R Turbo
HKS FMIC with EQ Tuning Custom Blow-Through MAF
EQ Tuning Custom Intake
Deatschwerks 850cc Injectors
Grimmspeed EWG UP with Tial 38mm EWG
Invidia Catless DP
Greddy Evo 2 Catback
Walbro
Hallman MBC
SMC Meth Injection running 50/50 mix
Custom Tune on 91 Octane using EQ Flash
This tune was done at about 23psi peak. Here is the chart:

This thing was a lot of fun! It spools up hard an pulls very hard all the way to redline. The EQ Shortblock has about 2000 miles on it now and hasn't burned a drop of oil.
We have another couple blocks being broken in right now, so look for results soon
Thanks
-- Ed

This is an 05 STI with the following:
EQ Tuning Stage 1 Shortblock
Stock STI heads/cams with 5 angle valve job
Blouch DOM 3.0R Turbo
HKS FMIC with EQ Tuning Custom Blow-Through MAF
EQ Tuning Custom Intake
Deatschwerks 850cc Injectors
Grimmspeed EWG UP with Tial 38mm EWG
Invidia Catless DP
Greddy Evo 2 Catback
Walbro
Hallman MBC
SMC Meth Injection running 50/50 mix
Custom Tune on 91 Octane using EQ Flash
This tune was done at about 23psi peak. Here is the chart:

This thing was a lot of fun! It spools up hard an pulls very hard all the way to redline. The EQ Shortblock has about 2000 miles on it now and hasn't burned a drop of oil.
We have another couple blocks being broken in right now, so look for results soon

Thanks
-- Ed
Last edited by EQ Tuning; Mar 14, 2009 at 04:17 PM.
Registered User
iTrader: (30)
Joined: Mar 2008
Posts: 1,256
From: Dublin
Car Info: 1998 M3, 2016 WRX
Last night we finalized the tune on our first EQ Built block 
This is an 05 STI with the following:
EQ Tuning Stage 1 Shortblock
Stock STI heads/cams with 5 angle valve job
Blouch DOM 3.0R Turbo
HKS FMIC with EQ Tuning Custom Blow-Through MAF
EQ Tuning Custom Intake
Deatschwerks 850cc Injectors
Grimmspeed EWG UP with Tial 38mm EWG
Invidia Catless DP
Greddy Evo 2 Catback
Walbro
Hallman MBC
SMC Meth Injection running 50/50 mix
Custom Tune on 91 Octane using EQ Flash
This tune was done at about 23psi peak. Here is the chart:

This thing was a lot of fun! It spools up hard an pulls very hard all the way to redline. The EQ Shortblock has about 2000 miles on it now and hasn't burned a drop of oil.
We have another couple blocks being broken in right now, so look for results soon
Thanks
-- Ed

This is an 05 STI with the following:
EQ Tuning Stage 1 Shortblock
Stock STI heads/cams with 5 angle valve job
Blouch DOM 3.0R Turbo
HKS FMIC with EQ Tuning Custom Blow-Through MAF
EQ Tuning Custom Intake
Deatschwerks 850cc Injectors
Grimmspeed EWG UP with Tial 38mm EWG
Invidia Catless DP
Greddy Evo 2 Catback
Walbro
Hallman MBC
SMC Meth Injection running 50/50 mix
Custom Tune on 91 Octane using EQ Flash
This tune was done at about 23psi peak. Here is the chart:

This thing was a lot of fun! It spools up hard an pulls very hard all the way to redline. The EQ Shortblock has about 2000 miles on it now and hasn't burned a drop of oil.
We have another couple blocks being broken in right now, so look for results soon

Thanks
-- Ed
very nice numbers indeed. now lets get those other blocks broken in and see some more numbers!!!!
Thread Starter
iClub Silver Vendor
iTrader: (12)
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop
The price of the build is $2500 with a customer provided good core (case, crank, and rods). Our machine shop inspects the block and crank, does a CNC bore, hone, and deck, and balances and polished the crank. Then we measure and blueprint all tolerances and oil clearances, set the ring gaps, and assemble the shortblock in house.
We have now built 5 of these blocks which are currently getting broken in. We're working on a stage 2 package with aftermarket rods and we're also working on acquiring a steady stream of good cores.
Thanks
-- Ed
Thread Starter
iClub Silver Vendor
iTrader: (12)
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop



