EQ Tuning News and Updates!
Registered User
iTrader: (6)
Joined: Mar 2006
Posts: 9,581
From: on the way to lake tahoe to shread! turbo beast
Car Info: 2016 WRX, 2014 lifter forester XT, 2005 JDM207 WGN
big thanks to ED.. tonight tonight i race a built SC GTO with DR on from a roll. and beat him by half a car. when we first took off i jumped about a car out then at 125 he was running me down hard. i thought that was fast enough.. also the GTO make 554whp so I'm happy i beat him both times we raced.. THANKS ED FOR THE GREAT TUNE
Da Brit.
iTrader: (31)
Joined: Feb 2008
Posts: 2,811
From: Bay Area, CA
Car Info: http://tinyurl.com/3vo4362
big thanks to ED.. tonight tonight i race a built SC GTO with DR on from a roll. and beat him by half a car. when we first took off i jumped about a car out then at 125 he was running me down hard. i thought that was fast enough.. also the GTO make 554whp so I'm happy i beat him both times we raced.. THANKS ED FOR THE GREAT TUNE
Registered User
iTrader: (5)
Joined: Apr 2007
Posts: 1,662
From: Sebastopol, CA
Car Info: '04 PSM Sti
________
AROMED VAPORIZER BOWL
Last edited by crfsti; Apr 24, 2011 at 06:00 PM.
My apologies.
Registered User
iTrader: (8)
Joined: Oct 2006
Posts: 2,506
From: BorderJumperEnforcer's momma's house
Car Info: Fast
Power steering line reroute is a basic mod that is very helpful on even a stock location setup, and as for etc...again, any big turbo setup will require a variety of etc mods, whether it is rotated or stock location.
My point is that for the amount of money, time and effort, a rotated setup seems like the obvious route...unless you want your setup to look somewhat stock...
that is totally off topic. BAN
The same old argument for stock location vs rotated. We all know that when it comes down to it a big stock location turbos still needs a downpipe, an inlet, an intake, and an uppipe is a good option as well.
Power steering line reroute is a basic mod that is very helpful on even a stock location setup, and as for etc...again, any big turbo setup will require a variety of etc mods, whether it is rotated or stock location.
My point is that for the amount of money, time and effort, a rotated setup seems like the obvious route...unless you want your setup to look somewhat stock...
Power steering line reroute is a basic mod that is very helpful on even a stock location setup, and as for etc...again, any big turbo setup will require a variety of etc mods, whether it is rotated or stock location.
My point is that for the amount of money, time and effort, a rotated setup seems like the obvious route...unless you want your setup to look somewhat stock...
The real argument for stock vs. rotated is whether you're piecing together mods vs. doing it all at once.
True if I was to do a stock location vs. rotated setup all at once from a 100% stock car, I would not argue against going rotated.
But say you've already got a CAI, turbo inlet, DP, UP from a stock turbo. Or you've got a one-piece header and uppipe that would need to be modified a lot to do rotated - those cases you'd find it much easier to just go stock location.
And this is the situation most people are in. There's relatively few guys who just throw on big power from a stock or near stock setup
The real argument for stock vs. rotated is whether you're piecing together mods vs. doing it all at once.
True if I was to do a stock location vs. rotated setup all at once from a 100% stock car, I would not argue against going rotated.
But say you've already got a CAI, turbo inlet, DP, UP from a stock turbo. Or you've got a one-piece header and uppipe that would need to be modified a lot to do rotated - those cases you'd find it much easier to just go stock location.
And this is the situation most people are in. There's relatively few guys who just throw on big power from a stock or near stock setup
True if I was to do a stock location vs. rotated setup all at once from a 100% stock car, I would not argue against going rotated.
But say you've already got a CAI, turbo inlet, DP, UP from a stock turbo. Or you've got a one-piece header and uppipe that would need to be modified a lot to do rotated - those cases you'd find it much easier to just go stock location.
And this is the situation most people are in. There's relatively few guys who just throw on big power from a stock or near stock setup
good point bro.
Registered User
iTrader: (8)
Joined: Oct 2006
Posts: 2,506
From: BorderJumperEnforcer's momma's house
Car Info: Fast
Definitely good points. I guess I just prefer to go through the trouble of selling off my stock-location parts, so that I ensure I have the cleanest, easiest to install and maintain, and best setup in the long run.
Also, I managed to buy a used 30r kit in excellent condition for around the same price as a brand new stock location 30r+ sized turbo. My 30r had about 100 miles on it when I bought it
Cheers!!
Also, I managed to buy a used 30r kit in excellent condition for around the same price as a brand new stock location 30r+ sized turbo. My 30r had about 100 miles on it when I bought it
Cheers!!
