CEL codes!! need help asap

Thread Tools
 
Search this Thread
 
Old Sep 21, 2008 | 07:40 PM
  #1  
blkdout04's Avatar
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 921
From: clayton, concord, walnut creek ca
Car Info: 04 java black pearl sti/06 honda ruckus
CEL codes!! need help asap

P2123 Accelerator Position Sensor D High Input

P2128 Accelerator Position Sensor E High Input

these are the 2 codes that my car is throwing at me, where the hell is this sensor? how do i fix it where can i buy it ect? any pix of it? any help would be great

thanks
Old Sep 21, 2008 | 07:46 PM
  #2  
wrxisthebest's Avatar
Registered User
iTrader: (15)
 
Joined: Jun 2007
Posts: 9,171
From: Arnold, CA
Car Info: 2003 PSM WRX, 80 Brat ready for Chevy 350 Swap.
ur cobb ap should be able to clear the codes..

see if they come back...
Old Sep 21, 2008 | 07:48 PM
  #3  
blkdout04's Avatar
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 921
From: clayton, concord, walnut creek ca
Car Info: 04 java black pearl sti/06 honda ruckus
aim me scbikes45
Old Sep 21, 2008 | 07:55 PM
  #4  
03_Impreza_Al's Avatar
Registered User
iTrader: (46)
 
Joined: Nov 2006
Posts: 8,803
From: "Streets Closed, Pizza Boy"
Car Info: www.pinoymamba.tumblr.com
its the throttle body sensor. What did you use to scan your codes?
Old Sep 21, 2008 | 07:58 PM
  #5  
blkdout04's Avatar
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 921
From: clayton, concord, walnut creek ca
Car Info: 04 java black pearl sti/06 honda ruckus
my acess port wasnt reading it, so i used a mac tools cel scanner then googled the codes
Old Sep 21, 2008 | 08:19 PM
  #6  
GST Motorsports's Avatar
Former Sponsor
iTrader: (14)
 
Joined: Sep 2006
Posts: 3,246
From: Hayward, CA
Car Info: WRX, EVO, MSP3
Check the cable connections to the TPS sensor on the throttle pedal and also check the connector and wiring to the throttle body, perhaps there is a cut wire or loose wire/connector.

Mike
Old Sep 21, 2008 | 08:33 PM
  #7  
blkdout04's Avatar
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 921
From: clayton, concord, walnut creek ca
Car Info: 04 java black pearl sti/06 honda ruckus
just checked everything, all plugs are good, there's a round screw on plastic thing under the gas pedal that came off an now won't screw back on, could this be the culprit? It came off shortly before this problem started and ibcouldwnt find where it went before?? I have it set in place time Togo for a drive to see if it does it still
Old Sep 25, 2008 | 02:01 AM
  #8  
blkdout04's Avatar
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 921
From: clayton, concord, walnut creek ca
Car Info: 04 java black pearl sti/06 honda ruckus
Originally Posted by blkdout04
just checked everything, all plugs are good, there's a round screw on plastic thing under the gas pedal that came off an now won't screw back on, could this be the culprit? It came off shortly before this problem started and ibcouldwnt find where it went before?? I have it set in place time Togo for a drive to see if it does it still
little bastard bumpstop sensor bs was the problem this whole time
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
edzwrx2
Interior, Exterior & Lighting
5
Mar 4, 2008 08:42 PM
yellow03 rex
Engine Management
5
Feb 25, 2006 04:54 PM
copracer288
Engine/Power - EJ25T (STI and 2006+ WRX)
5
Dec 6, 2004 05:16 PM
Xtremewrx
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
Aug 31, 2004 03:23 PM
flanagan
Engine Management
13
Jan 2, 2003 10:05 PM




All times are GMT -7. The time now is 11:06 PM.