Does anyone know of a shop in the bay area that makes intercooler piping? I just bought a front mount but it doesn't have any piping.

 

talk to mike at mpj he may be able to point you in the right direction. Or you could try an exhaust shop

 

haha, I just got done going through this whole ordeal, what a PITA I just made my own from madrel bends, you might want to find a greddy dealer that will sell you just the pipes for their FMIC if you dont want to go through the hassle. If you plan to fab yourself, make sure you put a ridge around all the pipe ends or you will have hoses blowing off, I dont care how hard you clamp them down.

I would also get about 3 feet of this....
http://cgi.ebay.com/ebaymotors/ws/eB...category=33742

and about 2 dozen of these....
http://cgi.ebay.com/ebaymotors/ws/eB...&category=6755

you will also need at least one of these 2X2.5"...
http://cgi.ebay.com/ebaymotors/ws/eB...category=33742

if you want to come down to santa rosa you can check out my setup

 

Pics pics! Sounds like a cool DIY Krinkov...good job! The ebay special!

 

my friend had his intercooler piping done at Black Trax, its a shop in milpitas right by the great mall.

 

hmm, I'll throw some pics up later this week

 

Hey what happened to the pics man?

 

hmm, heres one.

 

my buddy PHIL @ www.spoolinperformance.com can fabricate u one...

 

I wrote him and he never got back to me, thats why I had to finally make my own

 

"integra dc5 " or something like that is a guy who comes to the meets sometimes. he fabricated a great setup for itsallgooks, chris...

i'm not sure, but search for piping within Bay Area.

-Gagan