wheel spacers?
Guest
Posts: n/a
wheel spacers?
so i was wondering with 18 inch tires, how thick should i get the wheel spacers? 5mm,15mm,20mm, or 25mm? i dont want to put to much stress on the lugnuts. the gforce tires i have rubbed so i have to straighten my camber out and i lost the cool incline tires.....
Guest
Posts: n/a
the old tires where P-zeros and the tire cambers where on an incline so the inner tired wore out but the tires would take corners. i have dms coilovers and i had to straighten out the tires to get them to fit. I have about a hair thickness between the inner tire and the coilover its rubbing. i wanted to get spacers so i could adjust the cambers. is it dangerous to go bigger than 5mm because of the lugnuts? i have plenty of room in the flender but the inside might rub if i take a hard turn.
Registered User
Joined: Jul 2003
Posts: 686
From: SoCal
Car Info: PSM 2K2 WRX Wagon
If you cant afford new wheels you need to find out the offset of your wheels so you can figure out the size spacer you need. You'r offset should be at around +48-52mm or you will be needing new wheel bearings (around $700) sooner than you should.
Thread
Thread Starter
Forum
Replies
Last Post
