popping noise?
#2
Registered User
iTrader: (2)
Join Date: Jan 2011
Location: SFBayArea, CA
Posts: 173
Car Info: 2011 WRX base - SWP
Depending on whether it is coming from the front/rear of the car, it can be multiple things.
1) It's your sway bar bolt moving against the slot in the rear subframe. You most likely didn't torque it down enough. Every time you are shifting the weight of the car, the bolt shifts up and down.
2) There is play between the endlink inner diameter and the sway bar bolts
Just check to make sure everything it torqued down. Sometimes re-torquing of hardware is necessary after an initial break-in period.
1) It's your sway bar bolt moving against the slot in the rear subframe. You most likely didn't torque it down enough. Every time you are shifting the weight of the car, the bolt shifts up and down.
2) There is play between the endlink inner diameter and the sway bar bolts
Just check to make sure everything it torqued down. Sometimes re-torquing of hardware is necessary after an initial break-in period.
Thread
Thread Starter
Forum
Replies
Last Post