wrx brakes on a RS
Registered User
iTrader: (2)
Joined: Nov 2002
Posts: 955
From: Mann Engineering, Santa Clara, CA
Car Info: 13BRZ, 11FXT, 08T25, 07STI, 02WRX
Yes, you will need the brackets, rotors, pads, and backing plates. You reuse your existing calipers from the RS, they are the same.
Registered User
iTrader: (2)
Joined: Nov 2002
Posts: 1,644
From: Lawrence, Kansas
Car Info: 19' Impreza Sport Manual / 99 Miata / 13' OB
The only thing you really need is the rotor and the caliper bracket. The only diff. is the rotor is a little bigger so you have to move the caliper out a little. The dust shield may have to be bent back a little too to make room for the larger rotor.
Look here:
http://www.scoobymods.com/forums/sho...ght=WRX+rotors
You can do the same thing for the rear too if you want. The new legacys have larger rotors than the RS and WRX:
http://www.scoobymods.com/forums/sho...ght=WRX+rotors
For both changes the RS pads are the same however if you are getting new rotors why not spend the extra money and get new pads.
Peaty
Look here:
http://www.scoobymods.com/forums/sho...ght=WRX+rotors
You can do the same thing for the rear too if you want. The new legacys have larger rotors than the RS and WRX:
http://www.scoobymods.com/forums/sho...ght=WRX+rotors
For both changes the RS pads are the same however if you are getting new rotors why not spend the extra money and get new pads.
Peaty
Thread
Thread Starter
Forum
Replies
Last Post
AMS
Suspension / Brakes / Handling / Wheels / Tires
0
Jul 27, 2007 09:10 AM
cloudpicker
Suspension, Handling, and Brakes
5
Aug 13, 2006 04:08 PM
scobaru
Suspension, Handling, and Brakes
1
Jul 19, 2003 08:26 PM




