will 03 bars fit 04 wagon?
Thread Starter
Registered User
Joined: Feb 2004
Posts: 30
will 03 bars fit 04 wagon?
Will an STI (prolly replica) front strut tower bar and a cusco front swaybar off an 03 sedan fit my 04 wagon?
And will the swaybar still fit fine with Eibach springs?
Do I need to upgrade my endlinks for the front swaybar? I heard the 04s' were better from the factory.
And will the swaybar still fit fine with Eibach springs?
Do I need to upgrade my endlinks for the front swaybar? I heard the 04s' were better from the factory.
Last edited by rwheelz; Feb 22, 2004 at 01:23 PM.
Registered User
Joined: Jun 2003
Posts: 635
From: Marina Del Rey, CA
Car Info: 2004 WRX
The front should fit (I'm assuming the 04 sedan and wagon have the same engine bay). The 03 front and rear sedan strut bars fit fine on my 04. Not sure about the rear wagon bar, though...
Registered User
iTrader: (3)
Joined: Mar 2003
Posts: 3,461
From: "It will take time to restore chaos." GWB
Car Info: 72 Vespa with curb feelers
You will have to use the '04 bushings on the sway bar (rear for sure) since they redesigned the bushings and brackets on the '04. They might be a bit tight on a cusco bar, but you could always trim the bushing if all else fails.
Registered User
iTrader: (3)
Joined: Mar 2003
Posts: 3,461
From: "It will take time to restore chaos." GWB
Car Info: 72 Vespa with curb feelers
Originally posted by theworx
Or you could pick up the 04 mounting brackets for about $30.
Or you could pick up the 04 mounting brackets for about $30.
Thread
Thread Starter
Forum
Replies
Last Post
gruppe-s
Suspension / Brakes / Handling / Wheels / Tires
1
Aug 24, 2005 02:55 PM
wrxwhip
Wanted
6
Mar 3, 2005 01:33 PM