strut tower brace

Reply Subscribe

Thread Tools

Search this Thread

Nov 20, 2003 | 07:12 PM

whtwrx66

Guest

Posts: n/a

strut tower brace

I'm getting ready to install a strut tower brace, I've heard that its easy to bust these studs. I understand that the factory torque spec is 14.5 lbs, is there a suggested method of tightening these bolts. Thanks

Nov 21, 2003 | 03:26 PM

platypus

VIP Member

iTrader: (1)

Joined: May 2003

Posts: 2,445

From: GST Motorsports - Rally Division

Car Info: dangerous with a wrench

by hand, with a 1/4" drive ratchet. just snug 'em up.

Nov 21, 2003 | 09:36 PM

Kevin M

Registered User

iTrader: (12)

Joined: Nov 2002

Posts: 18,369

From: Reno, NV

Car Info: 1993/2000/2001 GF4 mostly red

The 3 bolts you use for the brace don't need much torque. They are just there to keep the strut mount snug to the frame when the suspension dropps. They don't bear weight at all. Therefore, jsut get them nice and snug, but don't torque them like you would, say, exhaust flange bolts.

Nov 22, 2003 | 04:51 PM

whtwrx66

Guest

Posts: n/a

thanks for everyones information. I appreciate the advice

Dec 8, 2003 | 11:19 PM

surferdude166

Registered User

Joined: Dec 2003

Posts: 26

From: Houston

Car Info: Impreza WRX

Has anyone had to shave off some of the top mount in the front to fit the cusco braces? I've heard this is necessary and I'm about to buy them and wanted to know ahead of time.