Noise after intalled poltek FR endlinks
#1
Registered User
Thread Starter
iTrader: (45)
Join Date: Jan 2003
Location: SF
Posts: 2,085
Car Info: WRC replica
Noise after intalled poltek FR endlinks
I just installed a set of this last Sat and noticed there was a chunking/clicking noise coming from the front. I got this set without instructions. I'm not sure if I installed it wrong. I had STI alum. front control arm and Cusco 21mm swaybar with this endlinks. Sounds like the links was hitting something underneath, but I couldn't figure it out. Please help guys. Pics will be helpful.
Andy
Andy
#6
Registered User
iTrader: (14)
Join Date: Nov 2001
Location: Peoples Republik of Kalifornia
Posts: 14,221
Car Info: 05 H2 SUT, 45 GPW, 10 Murano, 13 Boss 302
Here are a couple of pics from my installs.
This one is Whiteline links with the stock WRX front bar:
This one is off my STi and shows the Cusco bar with stock links:
Check your Poltec links and make sure they are the same length as the stockers (since they are adjustable). If that's okay, check your bar orientation relative to the pics above. Make sure you installed the bar the correct way (it's common to install it backwards/upside down).
This one is Whiteline links with the stock WRX front bar:
This one is off my STi and shows the Cusco bar with stock links:
Check your Poltec links and make sure they are the same length as the stockers (since they are adjustable). If that's okay, check your bar orientation relative to the pics above. Make sure you installed the bar the correct way (it's common to install it backwards/upside down).
Thread
Thread Starter
Forum
Replies
Last Post
adamsrs
Used Aftermarket Car Parts For Sale
2
07-22-2004 06:18 PM
JDClubSi
Suspension, Handling, and Brakes
22
07-09-2004 10:20 PM