N/A's 1st DOT compliant 4pot BBK that fits the OE 16x6.5" wheels!
#1
Guest
Posts: n/a
N/A's 1st DOT compliant 4pot BBK that fits the OE 16x6.5" wheels!
These brakes fit all Imprezas, Legacys and Foresters equpped with OEM 16x6.5" wheels.
These are the largest DOT compliant 4pot/rotor combo that will fit underneath your stock 16x6.5" wheels! So instead of going with a larger BBK which requires new wheels and tires, you can save your OE wheels for track rubber or for winter use.
Calipers
- AP Racing CP5100
- 4 x 38.1mm pistons
- Dust Seals
- DOT compliant
- 1.9kg/caliper
Rotors
- 12.2" (310mm) x 0.98" (25mm)
- 2-piece system. CNC machined billet aluminum hat.
- SS locking nuts
- directionally vented
- available in either x-drilled or slotted
-> Calipers & hardware weighs in at a feathery 4.50lbs each side (this is the caliper, caliper mount and SS lines)
-> Pads weigh in at 2.00lbs each side
-> 12.2" 2-piece rotors weigh in at 12.25lbs each side
Total weight / side = ~17.75lbs vs. Subaru OE 11.4" Rotor w/ FHI 4pots which is approxiately 32lbs
Therefore a total weight savings of 13.75lbs!
This Kit Comes With: (Front Only)
(1) AP Racing 4pot calipers CP5100
(2) SS Brakelines (F&R) & Hardware
(3) 12.2", 2-piece solid rotors, w/ CNC Billet Aluminum Hat (anodized black) *note: x-drilling available, as well as slotting @ no additional charge*
(4) Chromolly Brake Brackets (anodized black)
(5) Ferrodo SP pads
(6) AP Racing 5.1 brake fluid
For more info, feel free to email us -> info@ionperformance.com
Also, the link to our GB being held is the following ->
https://www.i-club.com/forums/showth...&threadid=7740
These are the largest DOT compliant 4pot/rotor combo that will fit underneath your stock 16x6.5" wheels! So instead of going with a larger BBK which requires new wheels and tires, you can save your OE wheels for track rubber or for winter use.
Calipers
- AP Racing CP5100
- 4 x 38.1mm pistons
- Dust Seals
- DOT compliant
- 1.9kg/caliper
Rotors
- 12.2" (310mm) x 0.98" (25mm)
- 2-piece system. CNC machined billet aluminum hat.
- SS locking nuts
- directionally vented
- available in either x-drilled or slotted
-> Calipers & hardware weighs in at a feathery 4.50lbs each side (this is the caliper, caliper mount and SS lines)
-> Pads weigh in at 2.00lbs each side
-> 12.2" 2-piece rotors weigh in at 12.25lbs each side
Total weight / side = ~17.75lbs vs. Subaru OE 11.4" Rotor w/ FHI 4pots which is approxiately 32lbs
Therefore a total weight savings of 13.75lbs!
This Kit Comes With: (Front Only)
(1) AP Racing 4pot calipers CP5100
(2) SS Brakelines (F&R) & Hardware
(3) 12.2", 2-piece solid rotors, w/ CNC Billet Aluminum Hat (anodized black) *note: x-drilling available, as well as slotting @ no additional charge*
(4) Chromolly Brake Brackets (anodized black)
(5) Ferrodo SP pads
(6) AP Racing 5.1 brake fluid
For more info, feel free to email us -> info@ionperformance.com
Also, the link to our GB being held is the following ->
https://www.i-club.com/forums/showth...&threadid=7740
Last edited by iON Performance; 02-06-2003 at 03:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Speed Element
NorCal Classifieds
1
09-05-2013 05:07 PM
Yin
Subaru OEM Parts For Sale
2
09-21-2009 09:23 AM
Yin
NorCal Classifieds
118
07-14-2009 02:02 PM
scoobieguy2002
Engine Management
2
12-12-2002 05:50 PM