Missing some fasteners in Brembo upgrade kit (was: I need HELP!)

Reply Subscribe

Thread Tools

Search this Thread

Sep 3, 2004 | 06:56 AM

Wazup8012

Guest

Posts: n/a

Missing some fasteners in Brembo upgrade kit (was: I need HELP!)

I recently purchased the STi upgrade kit from Brembo. The came incomplpete. It is missing 2 sets of bolts for the rear and 2 sets for the front. My car has been on stands the entire week and I need the car for the weekend.

Does any know anywhere where I can get some Grade 10 or higher bolts? I will drive an hour to get them I live ins Westchester county.

Rear
10mm Diameter x 1.5 thread pitch x 30mm Long

Front
12mm Diameter x 1.5 thread pitch x 40mm Long

Thanks and I appreciate any help given.

Sep 3, 2004 | 08:24 AM

Wazup8012

Guest

Posts: n/a

Isn't there anyone that can think of a place where I can go and get these bolts? I can't find a place anywhere. Even if your guessing I will call up the place and find out for myself.

Sep 3, 2004 | 08:50 AM

nachomc

VIP Member

iTrader: (7)

Joined: Jun 2003

Posts: 25,095

From: Funtown

Car Info: A limousine with a chauffer

Subaru dealer?

Sep 3, 2004 | 12:18 PM

DJTEN4

VIP Member

iTrader: (4)

Joined: Nov 2003

Posts: 916

From: Woodside, Cali

Car Info: 03 yellow wrx

call up ace hardware

Sep 3, 2004 | 07:11 PM

Wingless Wonder

Registered User

iTrader: (7)

Joined: Dec 2002

Posts: 10,029

From: Sacramento CA

Car Info: 02 Impreza WRX sedan

I am guessing that these are specialty bolts since hardware rated higher than Grade 8 is hard to find at your local stores. ARP is one outfit that might have high-strength fasteners like this but they sell only through mail order retailers.

I hope you find the bolts you need. You may end up having to replace the factory brake system just to use the car this weekend.

p.s. - I had to look up where Westchester Co was. Those of us native to the West Coast don't always have much knowledge of the the other side of the country.