Originally Posted by Jakes02

1. back the car up onto ramps
2. remove negative battery cable
3. unbolt the 2 bolts at the rear of the downpipe
4. put a box or something under the front of the cat-back (so the muffler doesn't hit the bumper when you lower it)
5. remove the hanger in the middle of the cat-back
6. remove the two hangers on the muffler
7. put your new cat-back together
8. put new cat-back on a piece of cardboard or a blanket and slide it under the car
9. put front of cat-back on the previously used box from step 3
10. lift muffler into place and connect it to the hangers
11.connect the hanger in the middle
12. bolt the cat-back to the downpipe
13. reconnect negative battery cable
14. start car and listen for exhaust leaks (don't drive off the ramps yet)
15. If you have no leaks you are good to go.

It looks like alot of steps but it's so easy.