i got works that are 18x10.5 in the front, and 18x11.5 for the rear. its all streched on a 215/40. should i have anything to worry about if i run them on my car.

 

this is a good question. Your rims are staggered but the tire sizes are the same all the way around?

 

As long as your overall diameter is the same, you should be good. But if you are using an inch wider rim with the same tire size, I don't think they will have the same diameter. You might need to go with 225s on the rears. But I'm just blowing smoke with the 225 guess.

 

i am gonna run adapters too. 5x100 to 5x114.3

 

The 11.5 is going to stretch the tire more then the 10.5. So the diameter is going to be different.

I would not run this setup honestly.

 

I'm thinking i need to test fit them

 

I wonder if they are even going to be able to fit! LOL 11.5 rim with adapters.. damnnn

 

I hope you're joking.

 

conversion spacers are 25mm. unless you have a widebody they wont fit. And unless your car is RWD i would not run them. You won't have the same contact patch front to back. You will mess up your diffs. even 10.5 is gonna take work to fit

 

Your Diff's just txt me.... They said to not do this.