mysubaruimp

iTrader: (1)

what does everyone think of these subs?

mysubaruimp

iTrader: (1)

Optimized for small (.88 cu ft) sealed enclosures.

Heavy gauge (.45mm), 4-layer Voice Coil on a Kapton former (1) is lightweight, fast and reliable.

We used state-of-the-art, laser-based Klippel measurement technology to perfectly center the voice coil in the magnetic field, improving X-max and BL linearity as well as micro and macro dynamics.

It flat-out sounds better than the competition.

Heavy gauge Nickel-Plated binding post terminals (2) for secure connections with large gauge (up to 10 ga.) wire.

Massive Cast Aluminum Basket (3) -a patented design-is rock-solid, non-flexing and acoustically inert, with extra heat dissipating qualities, for Polk/MOMO professional sound quality and reliability!

Vented Coil/Cone Coupler (4) constructed of rigid injection-molded ABS distributes the motive force of the Voice Coil over a larger surface area of the cone (as if the Voice Coil were "wearing snowshoes"!). The result is a vast reduction in distortion-producing cone break-up and resonance. Can you say quick, clean and deep? That's Polk/MOMO-style bass!

Kapton voice coil former (5) is high temperature-rated and retains it shape even if the driver ever "bottoms out"

Concave Aluminum-Clad Injection-Molded ABS Cone (6) for maximum stiffness and minimized cone break-up resonance for tight, clean and articulate bass response.

Huge Hi-roll Butyl Rubber surround (7) allows longer cone excursion for high-impact bass and lower distortion.

Flat Conex Spider (8) for lower distortion, more linear motion, and better support.

Colossal four-pound magnet structure (9) for high efficiency, and Vented Pole Piece for cool high power handling.

MOMO Design Quasar 2 rim-style Grille available as an optional accessory (model G12, pictured below)

Airtight gaskets on the front and the back of the basket insure an airtight installation. The rear gasket is removable for "show off" installations.

Triple vented for maximum airflow, heat dissipation and high power handling: Vented Coil/Cone Coupler, Vented Spider Platform and Vented Pole Piece all allow cooling air to freely flow over heat-generating parts to better harness all the watts your amp can dish out.

jobs99

They are pretty subs but for the price $380, you can get
a better subwoofer like the ED A12 for $275, 1000/1500 peak w,
very good sq and spl or the jl audio 12W6v2 for $339. These are
just some of the audiophile sub-bass quality out there.

ldivinag

iTrader: (3)

i believe that price includes an enclosure made specifically for it.

i was eyeing the 10 and 12" at 2 diff stores.

Gleb83

I have never heard them but Polk is a very reputable company. Also they have a huge advantage over other subs in their price category, they hit as low as 20 Hz so they would be great to fill in the lower end for your system and they go for 200 on ebay.

xlrater

Hey mysubaruimp,

I have one 10" polk/momo sub which I just recently installed. Although I didn't buy it in the box. Didn't want it to slide around and didn't know how I was going to mount something like that.
I picked up one of subee sounds trunk box and it sounds great!
The box is just a tad too big for the recommended .88 cu ft. The box is somewhere around .90 cu ft something. Not a big deal in my book.
I'm not taking it to any sound competitions.

Well if your interested I could take a pic for ya.

xlrater

mysubaruimp

iTrader: (1)

actually, i just installed 2 12"s in my car. like you i didnt get the boxes though. my box is about 1cu.ft., little big, but it is just a temp. box until i get around to making a real fiberglass one. thanks for all the input.