Installation help...
Guest
Posts: n/a
I'm trying to install a ps2 in my car but don't know how to go about to set it up. Right now i have the panasonic dvd player (CQ-VAD9300U) which says it has multi channels (use with 2 screens). Does anyone know how i can hook up the ps2 with this dvd player?
VIP Member
iTrader: (2)
Joined: Nov 2002
Posts: 3,639
From: Longing for my ol' white '02 WRX :(
Car Info: 2016 Acura RDX ... meh. Um, nice subwoofer?
You should get an extension cable that goes from the RCA jacks (probabaly on the back of the head unit) and hangs into the passenger footwell. You can always figure ways to make this look good, like wind up chord or have it go thru the glovebox, etc.
justgo's right about needing the converter. You can also make this pretty cool by tucking the invertor behind the dash and installing an actual outlet somewhere
I actually want to do that, it'd be bad azz 
jason
justgo's right about needing the converter. You can also make this pretty cool by tucking the invertor behind the dash and installing an actual outlet somewhere
I actually want to do that, it'd be bad azz 
jason
Registered User
iTrader: (1)
Joined: Dec 2003
Posts: 293
From: Westminster, Colorado
Car Info: 2004 Impreza WRX
I would be leary about installing a power inverter inside the dash they tend to create a lot of interfierence in your RCA signals. Under the passenger seat would be a good place .. as long as its far enough away from the foam padding to not burn it when it gets hot. also if you plan to install the inverter somewhere and locate the outlet elseware, I would install the inverter inside the trunk and run a shielded MC or AC cable to the location of the outlet(s)
Thread
Thread Starter
Forum
Replies
Last Post
cal_choi
Interior, Exterior & Lighting
7
Sep 15, 2003 10:06 PM
Big Donk
Engine/Power - EJ20T (pre-2006 WRX and JDM)
5
Jun 19, 2003 03:45 AM



