Help with Remote Starter Please
Guest
Posts: n/a
Help with Remote Starter Please
Hi, I'm new here I was hoping you guys can help me.
A friend of mine gave me a remote starter so I'm in the middle of installing it in my AT 2002 WRX.
I think I only 2 or 3 problems(hehe)
I have to run a wire to any 30amp relay.
If someone could give me a color and location of a wire to tap into that would be awesome b/c I'm really having a hard time with this one.
I need to tap the Tach Wire(which I think is Green? but I'm not sure where)
And lastly are there + and - wires for a Door Trip ? I think I found documentation for a - but the starter/alarm has a wire for each
Thanks so much
A friend of mine gave me a remote starter so I'm in the middle of installing it in my AT 2002 WRX.
I think I only 2 or 3 problems(hehe)
I have to run a wire to any 30amp relay.
If someone could give me a color and location of a wire to tap into that would be awesome b/c I'm really having a hard time with this one.
I need to tap the Tach Wire(which I think is Green? but I'm not sure where)
And lastly are there + and - wires for a Door Trip ? I think I found documentation for a - but the starter/alarm has a wire for each
Thanks so much
Guest
Posts: n/a
Everything you need should be here in this thread at the NASIOC forum. Ultimate Alarm Install Thread (NASIOC) Lots of reading, but its well worth it.
I have to run a wire to any 30amp relay.
If someone could give me a color and location of a wire to tap into that would be awesome b/c I'm really having a hard time with this one.
what is the wire for... main power, ign, 2nd ign, hvac(heater)????
I need to tap the Tach Wire(which I think is Green? but I'm not sure where)
You can catch the tach at any injector wire (the non-common side--there is going to be one wire that is going to be the same at each injector go to the different colored one...)
And lastly are there + and - wires for a Door Trip ? I think I found documentation for a - but the starter/alarm has a wire for each
If the door trigger is + then hook the + trigger wire to it and vice versa.....
If someone could give me a color and location of a wire to tap into that would be awesome b/c I'm really having a hard time with this one.
what is the wire for... main power, ign, 2nd ign, hvac(heater)????
I need to tap the Tach Wire(which I think is Green? but I'm not sure where)
You can catch the tach at any injector wire (the non-common side--there is going to be one wire that is going to be the same at each injector go to the different colored one...)
And lastly are there + and - wires for a Door Trip ? I think I found documentation for a - but the starter/alarm has a wire for each
If the door trigger is + then hook the + trigger wire to it and vice versa.....
Thread
Thread Starter
Forum
Replies
Last Post
big67
Stereo & Security
2
Dec 22, 2005 02:22 PM



