hawks hps pads
Thread Starter
VIP Member
iTrader: (5)
Joined: Jul 2004
Posts: 10,118
From: Walnut, CA
Car Info: 2005 Pooparu
hawks hps pads
are the Hawk Performance HPS any good?
i used to get ebc truck / van pads.. they were ok but very soft.
btw it's not for my car..
it's for my dad's minivan..
i need to get some new pads for his car.. so i'm looking to get some better pads but not spend too much money.
i used to get ebc truck / van pads.. they were ok but very soft.
btw it's not for my car..
it's for my dad's minivan..
i need to get some new pads for his car.. so i'm looking to get some better pads but not spend too much money.
VIP Member
Joined: Nov 2002
Posts: 12,422
From: Teh Phantom Zone
Car Info: 2013 Toyota Prius Plug In 2011 Toyota Prius
Originally Posted by kenji815
are the Hawk Performance HPS any good?
i used to get ebc truck / van pads.. they were ok but very soft.
btw it's not for my car..
it's for my dad's minivan..
i need to get some new pads for his car.. so i'm looking to get some better pads but not spend too much money.
i used to get ebc truck / van pads.. they were ok but very soft.
btw it's not for my car..
it's for my dad's minivan..
i need to get some new pads for his car.. so i'm looking to get some better pads but not spend too much money.
jee? I juan-der if we know any-juan in the brake industry?
VIP Member
Joined: Nov 2002
Posts: 12,422
From: Teh Phantom Zone
Car Info: 2013 Toyota Prius Plug In 2011 Toyota Prius
no fool I work in OEM stuff now. since you're being a dick about it call mike
BTW I ordered Kevin got some brake pads for kev, it cost him 14.36.
BTW I ordered Kevin got some brake pads for kev, it cost him 14.36.
aww...ok i'll be quiet now..
Registered User
Joined: Jun 2005
Posts: 996
Watch out for the Ferodo, The pad will jack up your rims bad. The pads are dusty as hell ( I know that if good) but when water mixes with the dust and the wheel heats up, it is like powder coating the dust onto your rim. I screwed up two rims with them. The only way to clean them is to sand that crap off. I could not steam clean it off. So watch out for those kind of pads. Unless your tracking and don't care, but its still looks bad.
One
One
Originally Posted by BLITZSTI
*oh snaps!*
the master bully flexing his stomach!
the master bully flexing his stomach!
VIP Member
iTrader: (2)
Joined: May 2004
Posts: 10,752
From: WATCH OUT FOR THE SCIC SNITCH!!!
Car Info: .
Originally Posted by sigma pi
thats not the bully thats the truth ask ferdie he was like OMG you melted the brakes
ferdie.. no
Registered User
Joined: May 2004
Posts: 373
From: Murrieta, CA
Car Info: 04 STi WRB
I had them too (Paperchasin's were mine once)...
I just installed them on a Legacy with a BBK (another one, not mine)...
BUT, in case you are interested, I happen to have a set of Legacy GT 12.x" rotors/2-piston calipers with Bobcats sitting in my garage for sale at this time. This is not my personal set since I like to keep my stock stuff.
I just installed them on a Legacy with a BBK (another one, not mine)...
BUT, in case you are interested, I happen to have a set of Legacy GT 12.x" rotors/2-piston calipers with Bobcats sitting in my garage for sale at this time. This is not my personal set since I like to keep my stock stuff.
VIP Member
iTrader: (2)
Joined: May 2004
Posts: 10,752
From: WATCH OUT FOR THE SCIC SNITCH!!!
Car Info: .
Originally Posted by jsalicru
I had them too (Paperchasin's were mine once)...
I just installed them on a Legacy with a BBK (another one, not mine)...
BUT, in case you are interested, I happen to have a set of Legacy GT 12.x" rotors/2-piston calipers with Bobcats sitting in my garage for sale at this time. This is not my personal set since I like to keep my stock stuff.
I just installed them on a Legacy with a BBK (another one, not mine)...
BUT, in case you are interested, I happen to have a set of Legacy GT 12.x" rotors/2-piston calipers with Bobcats sitting in my garage for sale at this time. This is not my personal set since I like to keep my stock stuff.
