Just Installed Hella Supertones
Thread Starter
Registered User
iTrader: (5)
Joined: May 2003
Posts: 131
From: San Francisco, CA
Car Info: 02' WRX
Just Installed Hella Supertones
I haven't seen anyone in town with these. Wow is all i can say! I just installed my hella supertones today. Install was easy. Took about 1 hour because i had to run to Lowe's to get more female disconnects for the wiring harness. These sound great!!!
Some of you guys may want to know what i used. Install will be much faster with all these things.
What i used:
14 guage wire
4 ring terminals
8 female disconnects
electrical tape
1 quick splice
I found this thread with an easy to read diagram.
http://forums.nasioc.com/forums/show...ght=hella+horn
Hope this helps. = )
Some of you guys may want to know what i used. Install will be much faster with all these things.
What i used:
14 guage wire
4 ring terminals
8 female disconnects
electrical tape
1 quick splice
I found this thread with an easy to read diagram.
http://forums.nasioc.com/forums/show...ght=hella+horn
Hope this helps. = )
Last edited by shad0wxb0i; Aug 31, 2005 at 11:59 PM.
iClub Silver Vendor
iTrader: (25)
Joined: Nov 2002
Posts: 15,494
From: Participating in some Anarchy!
Car Info: 2005 LGT wagon
Originally Posted by shad0wxb0i
I haven't seen anyone in town with these.
I'm glad you like the horns...they're definitly attention getters.
Warm Fuzzy Admin
iTrader: (45)
Joined: Mar 2001
Posts: 13,799
From: Sacramento, CA
Car Info: 97 LOB, 05 FXT, 03 Tundra
Originally Posted by shad0wxb0i
they should come with a plug and play harness...
For example, on WRX's, you don't even really need to relay the setup, it takes roughly 24 inches of wire and one connection to a factory horn harness with no splices.....a PNP harness would be impossible becuase there's so many different ways to install them, for positive or negave switched=cars, different locations, etc
I love my supertones
Registered User
iTrader: (2)
Joined: May 2004
Posts: 773
From: chico
Car Info: SOLD 05 RS - 35PSI -- In My Tires
Thread Starter
Registered User
iTrader: (5)
Joined: May 2003
Posts: 131
From: San Francisco, CA
Car Info: 02' WRX
haha! hey dan. yea only 77 posts... well now 78!!! yay! hehe.. i haven't been going on to this forum since i lost my car. But now since i got it back. i'm here = P
Registered User
iTrader: (3)
Joined: Feb 2005
Posts: 10,232
From: Front pleated TWill pants...
Car Info: 2004 PSM WRX
What are your guys' thoughts on leaving the supertones hooked up to the OEM alarm system? Or should I just have the alarm hooked up to one of the stock horns? Is there anything special I need to do to have them work with the OEM alarm?
Registered User
iTrader: (3)
Joined: Feb 2005
Posts: 10,232
From: Front pleated TWill pants...
Car Info: 2004 PSM WRX
Originally Posted by ******3k
hey look, my horns are on your car 
nice. i must say I did a damn good paint job
nice. i must say I did a damn good paint job