exhust for rally/ clearence size????
exhust for rally/ clearence size????
i got a 02 wrx and i will be getting into rallying / rally x and was wondering what exhuse i should run that will give me good ground clearence. right now i have a borla 3in catback and looking under the car it hangs prety low. what would be the best advise on a exhust to run? should i use my stock exhust and run a diff dp? what are youguys running and your experences with it thanks a lot i searched and nothing or i just retarded
thanks a lot
thanks a lot
If you're serious about rally, you'd just go to some garage and build a custom system. Get some mother side wall stuff and build it out of that. Your borlas should only be 2.5". Run 2.5" all the way down with a 3" cat at the tip or in the middle pending on your states emissions standards. Where abouts are you? The whole system should cost you about $90-$200 depending on your hook ups and where you go. It way better then spending $600 on some bling bling hunk of crap thats going to get ripped off with in 60miles. Keep in mind once you really start rally, part are disposable.
Mitch
Mitch
Registered User
Joined: Nov 2002
Posts: 28
From: PGT #762 Rally Impreza Project
Car Info: MY96 Impreza 2.2 L
The best clearance I've found is a generic $19 glasspack I found at Auto Zone. Check your local auto store and ask for a Cherrybomb or glasspack; they'll know what you're looking for. 

NESIC Web Site | Trunkmonkey FAQ | Trunkmonkey Racing | Trunkmonkeys in Action


NESIC Web Site | Trunkmonkey FAQ | Trunkmonkey Racing | Trunkmonkeys in Action
Thread
Thread Starter
Forum
Replies
Last Post
cutro64
NorCal Classifieds
15
Mar 21, 2010 05:32 AM
Donnie_Doritos
NorCal Classifieds
3
Mar 30, 2008 10:57 AM
Friedenreich686
Engine/Power - EJ20T (pre-2006 WRX and JDM)
10
Sep 13, 2005 03:51 PM



