'01 RS coupe soon to be STI.....
#169
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Carlsbad,CA/Athens,GR
Posts: 457
Car Info: 2001RSTI
OH Snap!!!...It's gna be pimped fo sho! Trunks gna have a screen dat pops out into another screen dat pops out into another screen dat fires layzer beams at deh hayters behind you son!!!
#170
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Carlsbad,CA/Athens,GR
Posts: 457
Car Info: 2001RSTI
JDM rear wiper components
Just in from Japanparts. I had bought the rear glass and wiper motor from Garage Tuning. The rest I had to buy seperately...I thought I could use the same components from an OBS but apparently the part # differ so I just ended up getting these...
1 Wiper....10 components...Major PITA!!!
The wiper motor cover for the rear decklid
Wiper arm
Wiper blade
Wiper arm bolt cover
Spray nozzle
Inner/outer grommets(same part x2)
Plastic cap
M6 Nut
1 Wiper....10 components...Major PITA!!!
The wiper motor cover for the rear decklid
Wiper arm
Wiper blade
Wiper arm bolt cover
Spray nozzle
Inner/outer grommets(same part x2)
Plastic cap
M6 Nut
#174
How did you mount your 12L? Running meth?
#175
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Carlsbad,CA/Athens,GR
Posts: 457
Car Info: 2001RSTI
No meth... It mounts perfectly like it would have been from the factory. I think I layed the 2 support bars over the cross beam thats behind the back seat. Lined up the brackets with some holes that were already in the decklid and I think I had the drill 2 more holes. It was a while ago. Then wired it in and replaced the Cruise cntrl button with a I/C water spray button.
#176
What a crazy history you've had with your 2.5... I grew up in sheltered little Cupertino and your story has me wide eyed O_O can't wait to see some pics of the roof scoop installed
#177
No meth... It mounts perfectly like it would have been from the factory. I think I layed the 2 support bars over the cross beam thats behind the back seat. Lined up the brackets with some holes that were already in the decklid and I think I had the drill 2 more holes. It was a while ago. Then wired it in and replaced the Cruise cntrl button with a I/C water spray button.
I'm looking forward to seeing it out of the paint shop.
#179
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Carlsbad,CA/Athens,GR
Posts: 457
Car Info: 2001RSTI
I think I just may have found my next set of wheels. Seeing if Gruppe S can convince Enkei to send a set over from Japan....Fingers crossed!
17x8 +48 Enkei RC-T4 in Bronze wrapped in 235-40 Direzza Star Specs
EDIT:Neither GruppeS nor SpeedElement can get those wheels....But Rallispec can get them in less than 2 weeks...WOOT!
17x8 +48 Enkei RC-T4 in Bronze wrapped in 235-40 Direzza Star Specs
EDIT:Neither GruppeS nor SpeedElement can get those wheels....But Rallispec can get them in less than 2 weeks...WOOT!
Last edited by JamesGRrallye; 10-09-2009 at 03:38 PM.
#180
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Carlsbad,CA/Athens,GR
Posts: 457
Car Info: 2001RSTI
Pics of the Progress...
Some pics I snapped today at the bodyshop...
Using the template I made, I installed the RA roof vent door and outlined the hole for them to cut...I had to leave before the cut was made...
I made the cut out for the Rear wiper motor in the decklid since this would be a major PITA if the glass was installed already...
And Test fitting some Ricer part...
And this beautiful FD was sitting in the shop...The owner is a specialist in custom CF pieces...and this car is a showcase of his work..
Using the template I made, I installed the RA roof vent door and outlined the hole for them to cut...I had to leave before the cut was made...
I made the cut out for the Rear wiper motor in the decklid since this would be a major PITA if the glass was installed already...
And Test fitting some Ricer part...
And this beautiful FD was sitting in the shop...The owner is a specialist in custom CF pieces...and this car is a showcase of his work..