Track/Severe duty Engine mounts
Thread Starter
Registered User
iTrader: (4)
Joined: Dec 2004
Posts: 970
From: roseville, ca
Car Info: 06 obp sti
Track/Severe duty Engine mounts
Got several motor mounts made. All designed in SolidWorks. Center piece is made out of 6061 bar stock, obviously machined and anodized gold. Delrin "bushings", stainless steel inner sleeve. Brackets are 1/8" steel laser cut and cnc bent. Brackets and all hardware (bolts, studs and new nuts) were all plated in Black Zinc which gives a nice uniform finish. $200 per set
Last edited by kmurphy; Feb 5, 2011 at 09:11 AM.
Thread Starter
Registered User
iTrader: (4)
Joined: Dec 2004
Posts: 970
From: roseville, ca
Car Info: 06 obp sti
edited 1st post for price.....yes these will be harsh and solid. I will have softer poly bushings for these as well, once the molds are made for casting the poly.
Looks like the cusco/beatrush mounts (but sexier 
lol )Very interested in the poly if they end up being made. Any idea on what the price might be for the ones w/ poly bushings?
lol )Very interested in the poly if they end up being made. Any idea on what the price might be for the ones w/ poly bushings?
Registered User
iTrader: (14)
Joined: Jun 2007
Posts: 4,499
From: L.A. and the mountains
Car Info: WRX
Thread Starter
Registered User
iTrader: (4)
Joined: Dec 2004
Posts: 970
From: roseville, ca
Car Info: 06 obp sti
I will most likely pay for the molds in 1-2 weeks. Then it takes a couple weeks for the batch of bushings to be made.
These will be machined as well in the near future, as well as a completely redesigned transmission brace.
These will be machined as well in the near future, as well as a completely redesigned transmission brace.
Thread Starter
Registered User
iTrader: (4)
Joined: Dec 2004
Posts: 970
From: roseville, ca
Car Info: 06 obp sti
So Ive pretty much sold all of 1st run of mounts. Going to probably finally put in the order for the poly bushings in the next week or so. How many of you guys were interested in the poly motor mounts?
