02 wrx wagon partout, OEM & aftermarket
Thread Starter
Registered User
iTrader: (13)
Joined: Nov 2009
Posts: 1,035
From: Sunnyvale, CA
Car Info: 02 WRX Wagon
Update: Whiteline 20-22 sway bar and links added! 7/11/13
Everything is from a 2002 WRX Impreza wagon unless otherwise stated and prices are ‘obo’
PM me for info or additional photos.
Aluminum front control arms, FULL DETAILS HERE: Post #33
Can include some v9 sti transverse bushings (oem ALK mount) ($300 obo)


Sparco Champion steering wheel - used, good condition. Perforated black leather, red stitching, and a red leather centering stripe on the top. One ripple in the leather on one side, been in my car for ~6 months of weekend use. 330mm diameter x 65mm dish ($180)

Perrin aluminum 5mt shift **** ($10) - old and battered, but comfortable and light

Beatrush delrin 5mt shift **** ($40) - Brand new, too small for my hands

steering wheel - including air bag ($150)
http://www.glebserbin.com/photos/i-x...-xJnxwtq-M.jpg
passenger dash airbag ($60)
seatbelts ($40 ea.)
Driver, Passenger, Left rear, Right rear, Center rear
93-01 Impreza sedan (maybe coupe?) rear seat - grey/black GC style ($40)
Bottom foam panel
Rear single piece foam panel
http://www.glebserbin.com/photos/i-x...-x3RRgJJ-M.jpg
top mount intercooler w/ silicone hose
http://www.glebserbin.com/photos/i-d...-d9TQ78D-M.jpg
http://www.glebserbin.com/photos/i-s...-sQWGtn8-M.jpg
OEM hood scoop to intercooler duct/splitter ($10)
http://www.glebserbin.com/photos/i-Q...-Q6ZZqcJ-M.jpg
rear sway bar with endlinks, bushings, and mounts ($20)
Whiteline front strut bar SOLD
http://www.glebserbin.com/photos/i-T...-TL6qJBP-M.jpg
Thermostats: Mishimoto 64*C and MotoRad 71*C
http://www.glebserbin.com/photos/i-3...-3Q85qwp-L.jpg
Hazard light button
http://www.glebserbin.com/photos/i-Q...-QL2fM5D-L.jpg
Subaru OEM front axles (female inner CV)
http://www.glebserbin.com/photos/i-H...-H6RCZgj-L.jpg
http://www.glebserbin.com/photos/i-j...-jS7G6bR-L.jpg
http://www.glebserbin.com/photos/i-p...-pZWdQSD-L.jpg
OEM v3 wrx/sti starter
http://www.glebserbin.com/photos/i-z...-znvCj5Z-L.jpg
http://www.glebserbin.com/photos/i-7...-7XdQQv4-L.jpg
Mahle forged pistons - used for ~500 miles
http://www.glebserbin.com/photos/i-b...-bMKfv6W-M.jpg
http://www.glebserbin.com/photos/i-4...-4jBhkZd-M.jpg
http://www.glebserbin.com/photos/i-F...-Fjk9dCC-M.jpg
PM me for info or additional photos.
Aluminum front control arms, FULL DETAILS HERE: Post #33
Can include some v9 sti transverse bushings (oem ALK mount) ($300 obo)


Sparco Champion steering wheel - used, good condition. Perforated black leather, red stitching, and a red leather centering stripe on the top. One ripple in the leather on one side, been in my car for ~6 months of weekend use. 330mm diameter x 65mm dish ($180)

Perrin aluminum 5mt shift **** ($10) - old and battered, but comfortable and light

Beatrush delrin 5mt shift **** ($40) - Brand new, too small for my hands

steering wheel - including air bag ($150)
http://www.glebserbin.com/photos/i-x...-xJnxwtq-M.jpg
passenger dash airbag ($60)
seatbelts ($40 ea.)
Driver, Passenger, Left rear, Right rear, Center rear
93-01 Impreza sedan (maybe coupe?) rear seat - grey/black GC style ($40)
Bottom foam panel
Rear single piece foam panel
http://www.glebserbin.com/photos/i-x...-x3RRgJJ-M.jpg
top mount intercooler w/ silicone hose
http://www.glebserbin.com/photos/i-d...-d9TQ78D-M.jpg
http://www.glebserbin.com/photos/i-s...-sQWGtn8-M.jpg
OEM hood scoop to intercooler duct/splitter ($10)
http://www.glebserbin.com/photos/i-Q...-Q6ZZqcJ-M.jpg
rear sway bar with endlinks, bushings, and mounts ($20)
Whiteline front strut bar SOLD
http://www.glebserbin.com/photos/i-T...-TL6qJBP-M.jpg
Thermostats: Mishimoto 64*C and MotoRad 71*C
http://www.glebserbin.com/photos/i-3...-3Q85qwp-L.jpg
Hazard light button
http://www.glebserbin.com/photos/i-Q...-QL2fM5D-L.jpg
Subaru OEM front axles (female inner CV)
http://www.glebserbin.com/photos/i-H...-H6RCZgj-L.jpg
http://www.glebserbin.com/photos/i-j...-jS7G6bR-L.jpg
http://www.glebserbin.com/photos/i-p...-pZWdQSD-L.jpg
OEM v3 wrx/sti starter
http://www.glebserbin.com/photos/i-z...-znvCj5Z-L.jpg
http://www.glebserbin.com/photos/i-7...-7XdQQv4-L.jpg
Mahle forged pistons - used for ~500 miles
http://www.glebserbin.com/photos/i-b...-bMKfv6W-M.jpg
http://www.glebserbin.com/photos/i-4...-4jBhkZd-M.jpg
http://www.glebserbin.com/photos/i-F...-Fjk9dCC-M.jpg
Last edited by Gancherov; Feb 10, 2014 at 03:55 PM.
Registered User
iTrader: (11)
Joined: Jan 2008
Posts: 6,849
From: Cheesesteakville
Car Info: 05 wrx wagon, 90 celica alltrac, 66 mustang
Quite a list of parts!
Interested in the front sway/links, strut bar, crank and rods.
Crank and rods are for a table project and the sway and strut bar is for my wagon.
Pm incoming
Interested in the front sway/links, strut bar, crank and rods.
Crank and rods are for a table project and the sway and strut bar is for my wagon.
Pm incoming
Registered User
iTrader: (57)
Joined: Aug 2006
Posts: 7,380
From: the area
Car Info: 04 impreza wrx R.I.P Daniel Wentz JOEBOBBUCKET
I know its not listed or i just missed it, but do you have the right rear interior trim? The carpeted panel that goes under the c/d pillar trim? And any chance of rear seats?
Thread Starter
Registered User
iTrader: (13)
Joined: Nov 2009
Posts: 1,035
From: Sunnyvale, CA
Car Info: 02 WRX Wagon
I know I do, but I'm not sure if I still have all 4. They are under the remaining (non-pictured) interior panels, and once I get those out of the way I'll let you know.



guessing they've got a wider track than stock gd wagon control arms like sedan ones?