diff between at bd3 and bg5?
#2
Warm Fuzzy Admin
iTrader: (45)
Join Date: Mar 2001
Location: Sacramento, CA
Posts: 13,799
Car Info: 97 LOB, 05 FXT, 03 Tundra
Well, BD = 95-99 US sedan
BG = 95-99 US wagon
Those dates are something like late 93-98 for the JDM models
The BG5 is the EJ20TT Touring Wagon, or GT-B. That's a sequentially turbocharged 2 liter motor available in Japan and other non-US countries.
A BD3, I haven't seen, but it's most likely an early (94-95 JDM) Legacy RS sedan, which is the same motor. Wagons are much more popular in Japan, so the sedans are comparatively rare.
Out of curiousity, where did you come up with those specific models?
BG = 95-99 US wagon
Those dates are something like late 93-98 for the JDM models
The BG5 is the EJ20TT Touring Wagon, or GT-B. That's a sequentially turbocharged 2 liter motor available in Japan and other non-US countries.
A BD3, I haven't seen, but it's most likely an early (94-95 JDM) Legacy RS sedan, which is the same motor. Wagons are much more popular in Japan, so the sedans are comparatively rare.
Out of curiousity, where did you come up with those specific models?
#5
Warm Fuzzy Admin
iTrader: (45)
Join Date: Mar 2001
Location: Sacramento, CA
Posts: 13,799
Car Info: 97 LOB, 05 FXT, 03 Tundra
No idea, but Subaru never had a turbo 1.8 in a modern chassis (the old GL's were, though)
That BD3 sounds like a base, stripped car. I'd be surprised if it was even awd. If it's the EJ18, it's got like 120hp.
It might be easier to get spares for a BD3, but why go through the effort? You're importing a car that shouldn't cost any more than $2k, will need repairs becuase it's old, and will have absolutely ZERO performance.
We have 2.5's inour cars, with 165hp, and those are woefully underpowered becuase the cars weigh a good amount.
Where do you live? Why are you looking at these particular options? (I'm not trying to be antagonistic, I'm just trying to see if we can figure out a better solution for you )
That BD3 sounds like a base, stripped car. I'd be surprised if it was even awd. If it's the EJ18, it's got like 120hp.
It might be easier to get spares for a BD3, but why go through the effort? You're importing a car that shouldn't cost any more than $2k, will need repairs becuase it's old, and will have absolutely ZERO performance.
We have 2.5's inour cars, with 165hp, and those are woefully underpowered becuase the cars weigh a good amount.
Where do you live? Why are you looking at these particular options? (I'm not trying to be antagonistic, I'm just trying to see if we can figure out a better solution for you )
#8
Warm Fuzzy Admin
iTrader: (45)
Join Date: Mar 2001
Location: Sacramento, CA
Posts: 13,799
Car Info: 97 LOB, 05 FXT, 03 Tundra
Yeah......
FWIW, one of our local club guys has a 1.8l in a Impreza L. Car is pretty much the lightest impreza made, most likely close to 600 pounds lighter than a legacy. And it's very, very slow.
That motor in a big car is bad news.
It really comes down to why you want this specific car, and why it's necessary to import it.......
FWIW, one of our local club guys has a 1.8l in a Impreza L. Car is pretty much the lightest impreza made, most likely close to 600 pounds lighter than a legacy. And it's very, very slow.
That motor in a big car is bad news.
It really comes down to why you want this specific car, and why it's necessary to import it.......
#10
Warm Fuzzy Admin
iTrader: (45)
Join Date: Mar 2001
Location: Sacramento, CA
Posts: 13,799
Car Info: 97 LOB, 05 FXT, 03 Tundra
Ok. I would stay away from a BD3 for any sort of performance. If you just want it to run around town in, the motor is pretty solid, but it will be very slow.
The BG5, depending on year, should be around 260-270hp with sequential (twin) turbos. If it's been well taken care of, it would probably be a good car, but any TT setup I've seen in any car tends to have reliability issue as it gets older, just because there's that many more mechanical parts, vacuum fittings, extra solenoids, etc.
How are the cars priced? Inexpensive, or do they carry a premium becuase they're JDM.
The BG5, depending on year, should be around 260-270hp with sequential (twin) turbos. If it's been well taken care of, it would probably be a good car, but any TT setup I've seen in any car tends to have reliability issue as it gets older, just because there's that many more mechanical parts, vacuum fittings, extra solenoids, etc.
How are the cars priced? Inexpensive, or do they carry a premium becuase they're JDM.
Thread
Thread Starter
Forum
Replies
Last Post
FromMugen2STI
Suspension, Handling, and Brakes
2
09-19-2005 05:34 PM
spdkills
Engine/Power - EJ20T (pre-2006 WRX and JDM)
8
02-14-2003 10:34 PM