Trouble turning DRLs back on
#1
Registered User
Thread Starter
Join Date: Jun 2008
Location: San Jose, CA
Posts: 1,808
Car Info: 2015 WRX
Trouble turning DRLs back on
The guy who I bought my car from disabled the DRLs on my '06 STI, and I figured it'd be a good safety feature to have enabled, so I reconnected the plug behind the glove box... except that doesn't appear to have had any impact on the functionality of my DRLs. Is there some other plug or switch somewhere that needs to be reconnected/turned on?
#2
VIP Member
Join Date: Apr 2003
Location: Trying to figure out something creative to put her
Posts: 1,348
Car Info: 2005 CGM WRX Wagon
There is also a module under the hood near the BCS. Search for disabling the DRL's and you should see that method. Just work backwards from that.
EDIT - here's the link. This module is on the left side above the airbox. https://www.i-club.com/forums/showth...ht=disable+DRL
EDIT - here's the link. This module is on the left side above the airbox. https://www.i-club.com/forums/showth...ht=disable+DRL
Last edited by VRWRX; 11-17-2008 at 03:58 PM. Reason: Posted link
#3
The STi won't have the resistor module because it has HID's. The dropping resistor is used only for halogen lights, to run them at a lower voltage.
I don't know the exact procedure for the STi, but it's not the one you will usually see posted for the '02-'06 Imprezas.
I don't know the exact procedure for the STi, but it's not the one you will usually see posted for the '02-'06 Imprezas.
#4
Registered User
Thread Starter
Join Date: Jun 2008
Location: San Jose, CA
Posts: 1,808
Car Info: 2015 WRX
Yeah, I looked and couldn't find the module under the hood.
Thread
Thread Starter
Forum
Replies
Last Post
brucelee
Bay Area
4
08-16-2009 02:41 PM
otistravette
Engine/Power - EJ25T (STI and 2006+ WRX)
1
04-09-2006 04:00 PM