Interior, Exterior & Lighting Bodykits, wings, seats, performance gauges, interior and exterior lighting.

hoodscoop

Old Dec 24, 2003 | 03:05 AM
  #31  
ivbdn's Avatar
Registered User
 
Joined: Mar 2003
Posts: 189
From: Los Angeles
As others have mentioned, you can slap on the WRX scoop. If you still don't like it, then you're gonna end up spending some major $$$$ to swap and customize things.

The wing can either be replaced with something to your liking or completely removed. It's up to you, and it's your car.

I guess a majority of us are partial to the scoops and spoilers as they do serve a purpose unlike other cars that use them as part of its' styling.

Originally posted by arctb76
the salesman (who claims to have gone to STI school and had track time in the car)...
SOA selected a number of lucky salesmen to actually take an STi out on the track. They had instruction and everything, so it's very possible that he was among the lucky to have the opportunity.
Old Dec 25, 2003 | 11:41 PM
  #32  
Choku Dori's Avatar
VIP Member
iTrader: (2)
 
Joined: Nov 2002
Posts: 15,425
From: Under your bed, in your closet, and in your head
Car Info: Corvette Z51
Yup yup there was an article in Subaru's "Drive" magazine detailing the dealer training.
Y'know, I think he finally gave up on the scoop
Old Jun 7, 2006 | 05:59 AM
  #33  
kwright69_02's Avatar
Registered User
 
Joined: Mar 2006
Posts: 19
From: HOUSTON, TX
Car Info: 2002 WRX
Originally Posted by Silver arrow
The car will start to produce downforce at 75 mph. Below that no wings or spoilers really do much. Above 75 mph in creates more DF than lift.
umm....no
it will produce downforce at MUCH lower speeds than that. maybe you meant to say "significant" downforce. the equation for downforce on the wing (normal to the surface) would be:
F=1/2*rho*A*v^2*cos(theta)
F=total force exerted onto wing (Newtons)
rho=density of air specific to altitude (~1.3 kg/m^3)
A=surface area of wing wind is acting upon (m^2)
V=velocity of wind flowing over car (for FBD analysis,assume car is standing still) (m/s)
theta=angle between wind vector and line normal to surface of wing (deg)

The change in force is proportional to the square of the velocity. I would say that the downforce induced has no effect until ~100mph. This is just a simple analysis and doesn't account for lift on the underside, pressure drag, etc. However, it's good enough for the girls i date.

Last edited by kwright69_02; Jun 7, 2006 at 06:01 AM.
Old Jun 7, 2006 | 06:46 AM
  #34  
jdepould's Avatar
Registered User
iTrader: (2)
 
Joined: Jul 2004
Posts: 1,659
From: USA
Car Info: 1990 thing
Originally Posted by kwright69_02
umm....no
it will produce downforce at MUCH lower speeds than that. maybe you meant to say "significant" downforce. the equation for downforce on the wing (normal to the surface) would be:
F=1/2*rho*A*v^2*cos(theta)
F=total force exerted onto wing (Newtons)
rho=density of air specific to altitude (~1.3 kg/m^3)
A=surface area of wing wind is acting upon (m^2)
V=velocity of wind flowing over car (for FBD analysis,assume car is standing still) (m/s)
theta=angle between wind vector and line normal to surface of wing (deg)

The change in force is proportional to the square of the velocity. I would say that the downforce induced has no effect until ~100mph. This is just a simple analysis and doesn't account for lift on the underside, pressure drag, etc. However, it's good enough for the girls i date.
um, I'm pretty sure you need to check the date on the last post.
Old Jun 19, 2006 | 10:51 PM
  #35  
projectwhiterex's Avatar
Registered User
iTrader: (1)
 
Joined: Jun 2005
Posts: 294
From: San Jose
Car Info: 2003 ASPEN WHITE WRX
hood scoops are the sexxxx....you dont like it go buy an evo
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rudedogsurfrat
Ongoing Projects
3
Mar 9, 2003 06:35 PM
rudedogsurfrat
For Sale by Members
0
Mar 7, 2003 09:09 AM
mehlt
Hawaii
7
Feb 10, 2003 11:42 AM
bemani
Subaru OEM Parts For Sale
0
Feb 7, 2003 09:54 AM
ScoobyHead1993
Wanted
3
Dec 3, 2002 12:01 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 04:39 PM.