fixin my light on new year night
Guest
Posts: n/a
fixin my light on new year night
sup. i was just wonderin if anyone knows how to disable the headlights turnin on after i release my e-brake. does anyone know what to disconnect or do in general. i was tryin to disconnect it last night but it just disconnects the "BRAKE" lamp in my dash and leaves my lights aglow. what to do? thanks.
Registered User
iTrader: (2)
Joined: Dec 2002
Posts: 833
From: At the store trading the box of tissue in on some brawny!
Car Info: Platinum 02 WRX, Progress springs,JIC Bullet exhaust , STI shifter, Accessecu, Rota Sub Zero
difinitive DRL mod
The relay in the engine bay is fine if you are not planning any HID conversions .If you are you must disconnect the DRL plug which is found behind and to the right of your glove box.Remove glove box(undo all the philips heads and the one plastic pop rivet next to the door) , carefully pull down entire glove box.
To your right you will see 3 connectors , the large black one closest to the body (behind the blue one) is what you're looking for...unplug the white connector plug , check that you have disabled the DRL's and re-install your glove box.
This completely disables your DRL system and does not leave any dangling open plugs in your engine bay.
Good luck!
JV
To your right you will see 3 connectors , the large black one closest to the body (behind the blue one) is what you're looking for...unplug the white connector plug , check that you have disabled the DRL's and re-install your glove box.
This completely disables your DRL system and does not leave any dangling open plugs in your engine bay.
Good luck!
JV
Thread
Thread Starter
Forum
Replies
Last Post
