Do I have to use a harness bar to attach racing harnesses in my car?
11-09-2003, 02:48 AM
#1
Registered User
Thread Starter
Join Date: Nov 2003
Location: Orlando
Posts: 57
Car Info: Subaru WRX 2002
Do I have to use a harness bar to attach racing harnesses in my car?
Hey yall it's Mike again. I'm getting Sparco Torino racing seats in my car. As far as putting the harnesses in do I have to use a harness bar to do it? Or is there away to connect them and not use the harness bar? Thanks again yall
11-09-2003, 06:21 PM
#2
Registered User
iTrader: (2)
Join Date: Dec 2002
Location: At the store trading the box of tissue in on some brawny!
Posts: 833
Car Info: Platinum 02 WRX, Progress springs,JIC Bullet exhaust , STI shifter, Accessecu, Rota Sub Zero
A search will show you how to attach them to the rear seatbelt mounting bolts.Most have them installed this way.
11-10-2003, 01:03 AM
#4
Registered User
iTrader: (3)
Join Date: Dec 2002
Location: The Empire
Posts: 250
Car Info: 95 Legacy wagon
I believe that you could bolt the harnesses in onto one of the rear seatbelt mounting points by bolting it in with a longer bolt and maybe a spacer...
you only really need the harness bar if you want the harnesses to be a scca legal mounting...
didnt really help but oh well
JAN
you only really need the harness bar if you want the harnesses to be a scca legal mounting...
didnt really help but oh well
JAN
11-10-2003, 02:07 AM
#5
Guest
Posts: n/a
Depending on the type of Harness you get(SaBelt in my rx7) it should come with swivel bushings that will allow you to attach the rear of the harness to the rear passenger seat belt harness bolts(sheesh...say that 3 tiems fast).
Installation should only require you to remove your rear seat, which if I recall is a 2 second job. Once you get that done, you'll need to attach one eye bolt into the stock front belt harness, and one other piece that you put the stock bolt thru. Pretty easy stuff.
Hardest thing is adjusting the belt just right.
Installation should only require you to remove your rear seat, which if I recall is a 2 second job. Once you get that done, you'll need to attach one eye bolt into the stock front belt harness, and one other piece that you put the stock bolt thru. Pretty easy stuff.
Hardest thing is adjusting the belt just right.
11-12-2003, 01:32 PM
#6
VIP Member
iTrader: (8)
Join Date: Feb 2003
Location: Santa Rosa, CA
Posts: 4,755
Car Info: 02 Subaru WRX w/ JDM Spec C
i have bride seats in my car with sparco harnesses. i have the double buckle system that is rear passenger freidnly and it just mounts to the rear seatbelt eye holes. very simple and passenger friendly
11-12-2003, 08:53 PM
#7
Registered User
iTrader: (2)
Join Date: Dec 2002
Location: At the store trading the box of tissue in on some brawny!
Posts: 833
Car Info: Platinum 02 WRX, Progress springs,JIC Bullet exhaust , STI shifter, Accessecu, Rota Sub Zero
http://www.soloracer.com/imprezarallye4.html
Try this link, it may answer your questions!
Try this link, it may answer your questions!
11-12-2003, 09:33 PM
#8
Registered User
Thread Starter
Join Date: Nov 2003
Location: Orlando
Posts: 57
Car Info: Subaru WRX 2002
Thanks for the help guys but all these ways you're showing me makes it so I really can't have passangers in the backseat. Is it possible to install racing harnesses without a harness bar and still have passangers in the back seat without the harnesses in there way?
Thread
Thread Starter
Forum
Replies
Last Post
SDTONORCALWRX
NorCal Classifieds
10
01-30-2013 03:38 PM
Daredevil
Used Aftermarket Car Parts For Sale
13
10-25-2004 09:37 PM
Chillibop
Used Aftermarket Car Parts For Sale
0
04-11-2004 07:27 PM
