mokeOne

iTrader: (14)

i saw some on a site a while back for the 08+ impreza, but i can't seem to remember where it was that sold them. they had smoke and red for the tails, and clear, smoke, yellow for the head & fogs. can anyone point me in the right direction?

sleepy_doe807

iTrader: (1)

http://www.lamin-x.com/

or

http://www.bluebatmobile.net/

stupidchicken03

iTrader: (38)

ebay too

perky808

iTrader: (14)

any body knows who can install locally in hawaii..

robie1208

They aren't that hard to install yourself. Just take your time and they'll come out fine. I removed the tail lights from the car just so it was easier to apply the overlay.

mokeOne

iTrader: (14)

oh sweet, lamin-x was the one i saw before but totally forgot. thanks!

perky808, super easy to do yourself. i did the fogs on my bugeye a few years back and it was like taking candy from a baby. just remember to spritz the tails/headlights with water before you apply the overlay, then another spritz on top of that. use the squeegee that's included to press out the air bubbles and let it sit out in the sun for a few hours. being hawaii, shouldn't take very long to dry up nice.

sleepy_doe807

iTrader: (1)

on the outer tail lights, i'd recommend a real heat gun. my wife's hair dryer didn't get the results i wanted.

mokeOne

iTrader: (14)

cool, thnx for the tip.
i remember doing my friends crx tails back in the day with a hairdryer. took like 2 hours lol

STiForFun

iTrader: (6)

clear lamin-x okay on headlights, paint the tails with stained glass spray paint, preferably red...smoked if you 'have to'.

only1NCE

iTrader: (2)

anyone in San Jose, CA area get their taillights done? if so, where did you get them put on? I have a set of blubatmobiles in my room waiting to get installed

wongjonsilver

iTrader: (2)

adsafasdfafasdfasdfasdfasdfasf

izzyidk?

iTrader: (9)

I sprayed mine and they look good

owencalouro

iTrader: (3)

any word on this, i got laminx rear covers and had mr tint install after i messed up the 1st pair. Now the film is coming off around the edges and am an very unhappy with the job. I would like to get them painted but i am worried about fade and me doining a crappy paint job...