Just picked up the car...
#1
Registered User
Thread Starter
iTrader: (14)
Join Date: Jul 2004
Location: Under the Truck
Posts: 419
Car Info: 05 wrx
Just picked up the car...
from pfluger in waipahu. The exedy stage 2 grabs really hard. It shudders in first if I do not raise the rpm a little. The ACT streetlite flywheel is a great difference in throttle response. It revs up quickly. The RA gears are great. I love the way they make the car feel. The car should have came with this gear set. Well, I am trying to take it easy now for the break in, but I will keep you all posted.
#4
Registered User
iTrader: (4)
Join Date: Dec 2002
Location: Southern California
Posts: 2,176
Car Info: 2016 Z51 C7, 2007 Exige S, 2008 ZX-10R, 2016 Taco
Hey,
someone let me drive their RA gears. I'm seriously debating between the RAs and the 6-speed. I really don't think I need the 6-speed now, and if I seriously upgrade the motor, the 6-speed won't be enough. I don't drag, so I think the RAs might suffice.
San
San
#6
right on Shane...break it in first...and remember it's still breakable...i wish i had the money on the side to purchase one...
im just saying this because a fella i know(im sure some of you know him), broke his 1st gear(i think)...but then again he drives that car like it's an old school muscle car...
im just saying this because a fella i know(im sure some of you know him), broke his 1st gear(i think)...but then again he drives that car like it's an old school muscle car...
#7
Registered User
iTrader: (6)
Join Date: Mar 2004
Location: Ewa
Posts: 420
Car Info: DGM 2011 WRX Hatch
What exactly is clutch shudder? From what I'm reading, pretty much any non-oem clutch on our cars will result in it. I need to know cuz my clutch is pretty worn out already and I only got 40k miles on my STi. It only grabs in the last 30-40 percent.
#8
Originally Posted by Shane Morris
from pfluger in waipahu. The exedy stage 2 grabs really hard. It shudders in first if I do not raise the rpm a little. The ACT streetlite flywheel is a great difference in throttle response. It revs up quickly. The RA gears are great. I love the way they make the car feel. The car should have came with this gear set. Well, I am trying to take it easy now for the break in, but I will keep you all posted.
did pfluger install ra gears for you? how much did they charge?
#9
Registered User
iTrader: (4)
Join Date: Dec 2002
Location: Southern California
Posts: 2,176
Car Info: 2016 Z51 C7, 2007 Exige S, 2008 ZX-10R, 2016 Taco
The
clutch shudder is normal even with stock clutches, unless you have the newer heavier flywheel. This is usually only when the vehicle is cold. The shudder is usually minimized if you aggressively let the clutch out every once in a while.
San
San
#10
Originally Posted by oldmansan
clutch shudder is normal even with stock clutches, unless you have the newer heavier flywheel. This is usually only when the vehicle is cold. The shudder is usually minimized if you aggressively let the clutch out every once in a while.
San
San
but then again i did drop the clutch disc when installing it, and made a very small kind crack on the outer side of the disc...maybe that's why...
but like the locals would say..."cuz that's MINAH"(minor problem)...