cel
Thread Starter
Registered User
iTrader: (6)
Joined: Jan 2010
Posts: 324
From: Crestview Fl
Car Info: 04' wrb WRX sedan
cel
I'm getting code P0245 wastegate actuator "A" low. I'm running a turbosmart eboost. My check engine light stays on even after I reset the ecu. Anyone have any ideas?
Plug in the stock BCS and just leave it there and the code should go away.
Or turn it off in romraider if you have a tactrix cable.
Straight from the Eboost install manual:
- Ensure that the OEM solenoid remains connected to the ECU’s wiring harness, If not the “Check Engine” light may be triggered.
- The factory boost control solenoid is NOT a sensor of any kind, its removal from the waste gate actuator hose will NOT cause any
adverse effects.
Or turn it off in romraider if you have a tactrix cable.
Straight from the Eboost install manual:
- Ensure that the OEM solenoid remains connected to the ECU’s wiring harness, If not the “Check Engine” light may be triggered.
- The factory boost control solenoid is NOT a sensor of any kind, its removal from the waste gate actuator hose will NOT cause any
adverse effects.
Last edited by Deraj_53; Apr 10, 2011 at 04:11 PM.
VIP Member
iTrader: (38)
Joined: Apr 2003
Posts: 6,196
From: Rockin my 6th Suby in the 808 in the past decade!
Car Info: 01 Impreza RSTi, 08 Evo MR, and 13 XV
Plug in the stock BCS and just leave it there and the code should go away.
Or turn it off in romraider if you have a tactrix cable.
Straight from the Eboost install manual:
- Ensure that the OEM solenoid remains connected to the ECU’s wiring harness, If not the “Check Engine” light may be triggered.
- The factory boost control solenoid is NOT a sensor of any kind, its removal from the waste gate actuator hose will NOT cause any
adverse effects.
Or turn it off in romraider if you have a tactrix cable.
Straight from the Eboost install manual:
- Ensure that the OEM solenoid remains connected to the ECU’s wiring harness, If not the “Check Engine” light may be triggered.
- The factory boost control solenoid is NOT a sensor of any kind, its removal from the waste gate actuator hose will NOT cause any
adverse effects.
Thread Starter
Registered User
iTrader: (6)
Joined: Jan 2010
Posts: 324
From: Crestview Fl
Car Info: 04' wrb WRX sedan
Thanks, weird thing is it didn't come on when I had the Hallman mbc installed. I...kinda feel...stupid right now. Oh well, ya live and learn. I choose the road less traveled by?
Thread
Thread Starter
Forum
Replies
Last Post
MaVz
Engine/Power - EJ20T (pre-2006 WRX and JDM)
4
Jun 16, 2004 09:41 PM
esracer
Engine/Power - EJ20T (pre-2006 WRX and JDM)
4
Mar 16, 2004 11:56 AM
NeVzWRX
Engine/Power - EJ20T (pre-2006 WRX and JDM)
10
Jun 23, 2003 11:38 AM
NORSE
Aftermarket Forced Induction - Turboed factory NA engines
3
Nov 25, 2002 11:12 AM
