Cel P1137
Guest
Posts: n/a
Cel P1137
My check engine light when on a week ago and the ecu gave me three codes. A p0130 (02 sensor) and 2 for p1137. I replaced the main O2 sensor and it helped the car run alittle better but it still hesitates under loads. My real question is what dose the p1137 code mean. Any help would be great because i just want my car to run normal again.
thank you
Steve
thank you
Steve
I had the same problem, had posted a bit on nasioc on this. I started out with the P0130 IIRC, replaced the sensor, had a permanent instant CEL instead, wiggled the connection wires a bit to get an intermittent P1137. Fixed by disconnecting the sensor from the pigtail/harness, blasting it with electronic cleaner, and reseating/reconnecting the sensor/pigtail connection.
I can't exactly remember all the O2 sensor codes I went through. Try a nasioc search on my username for more detail if you want.
Jim
I can't exactly remember all the O2 sensor codes I went through. Try a nasioc search on my username for more detail if you want.
Jim
Thread
Thread Starter
Forum
Replies
Last Post
Su_be_FrEsh
Engine/Power - non turbo (All non turbo Imprezas)
4
Sep 21, 2007 11:53 AM
MaVz
Engine/Power - EJ20T (pre-2006 WRX and JDM)
4
Jun 16, 2004 09:41 PM
esracer
Engine/Power - EJ20T (pre-2006 WRX and JDM)
4
Mar 16, 2004 11:56 AM
NeVzWRX
Engine/Power - EJ20T (pre-2006 WRX and JDM)
10
Jun 23, 2003 11:38 AM




