WRX Turbo Replacement - Do I need to replace the oil line?
Originally Posted by Mr. Xevious
its horrible when there is no traffic in the tech forums and questions are not answered 
yay for mcdrama he posts alot in technical
Thread Starter
the artist formerly known as mcdrama
iTrader: (23)
Joined: Apr 2004
Posts: 6,428
From: Santa Cruz Mountains, CA.
Car Info: WRBP 2015 WRX Premium/CVT
Turbo Coolant line banjo bolt copper crush washers
GASKET - 12X16X1
803912040
QTY - 10
Turbo oil return rubber line
HOSE - 15X22
807515712
I managed to get the two oil return line washers, but not in a bag with the part number. =\
GASKET - 12X16X1
803912040
QTY - 10
Turbo oil return rubber line
HOSE - 15X22
807515712
I managed to get the two oil return line washers, but not in a bag with the part number. =\
Originally Posted by mcdrama
Turbo oil return rubber line
HOSE - 15X22
807515712
I managed to get the two oil return line washers, but not in a bag with the part number. =\
HOSE - 15X22
807515712
I managed to get the two oil return line washers, but not in a bag with the part number. =\
that's the oil return that goes on the bottom, why would you need that? The oil return line doesn't have any washers
Thread Starter
the artist formerly known as mcdrama
iTrader: (23)
Joined: Apr 2004
Posts: 6,428
From: Santa Cruz Mountains, CA.
Car Info: WRBP 2015 WRX Premium/CVT
Originally Posted by verc
that's the oil return that goes on the bottom, why would you need that? The oil return line doesn't have any washers
paranoia... and 82K miles
Thread
Thread Starter
Forum
Replies
Last Post
mattsn0w
Engine/Power - EJ20T (pre-2006 WRX and JDM)
7
Aug 13, 2011 09:56 PM
bringndefinitio
Suspension, Handling, and Brakes
9
Mar 17, 2006 03:53 PM
JoeT
Aftermarket Forced Induction - Turboed factory NA engines
4
Nov 26, 2002 04:46 PM
