so i got my turbo back, intake, and crank pully in what mod should i do next

 

up-pipe

 

engine management

 

^^^Those two replies are good. In that order.

Then some suspension, rims and brakes.

 

silicone ic hoses.

 

congrats on your most recent mods. up-pipe, em both sound good

 

Up-pipe, then EM then a custom tune.

 

i got the up pipe and they want 225.00 to put it in is that to much i have rims on it already and a unichip

 

hello you have to do this. you will find a bunch of info on how to do it yourself. do some research. if it is within your ability do it yourself. it took me almost three days to finish. one piece of advice DO NOT DRINK & MOD

 

Wow $225 is alot.. Where are you located

 

DAYMN ! 3 DAYS ! HAHAHAHAHA . . . drinking and modding=

 

its not that hard to do...just get a friend to help you ! you can prolly knock it out in 3-5 hrs depending on the tools you have and if you know what your doing

 

Just did up and down pipe took me 3 nights after work taking my time to do it. A good set of instructions would be helpful. I used the Vishnu stage zero. Is your chip already programed for the up pipe? Did you get a EMI adapter also to clear up that boost transition stumble? Hope everything goes well!

 

hello, it can be done in the 3-5 hour realm. but i REALLY took my time and ran into a few problems. the one major problem was that i lost a down-pipe nut. then paranoia set in from the alcohol. where is that damn nut! is it in the turbo or maybe the header?! i had to take everything apart and put it all back together in search of the missing nut, that i never found. please if you learn anything from this post let it be to always keep your nuts/nutz in check