STi Injector Install.......

Reply Subscribe

Thread Tools

Search this Thread

Oct 8, 2003 | 05:07 PM

bluesubeguy

Guest

Posts: n/a

STi Injector Install.......

hello all.......well i just picked up my stI injecttors and need to know how to install them......if anybody knows any links that would be greatly appreciated!! im installing them asap cuz tmrrw im going to DYno my CAr!!!!! im at a stage 4 with 18g turbine,,,fmic .....pretty much the whole deal!!! wat kinda numbers u guys predict ill be seeing?ill probably have it tuned at 17 psi!!!thanx again and ill post as soon as i get my chart!wish me luck!

Oct 8, 2003 | 05:09 PM

cnk

Registered User

Joined: Feb 2003

Posts: 49

http://www.turboxs.com/Stage%204%20I...structions.htm

Calvin

Oct 8, 2003 | 05:10 PM

bluesubeguy

Guest

Posts: n/a

damn that was fast!! kool man thanks alot!!

Oct 8, 2003 | 05:21 PM

cnk

Registered User

Joined: Feb 2003

Posts: 49

No problem. . have fun with the Green Brackets of Death!!

Calvin

Oct 8, 2003 | 05:24 PM

bluesubeguy

Guest

Posts: n/a

green brackets of DEATH!!!that doesnt sound good ...wat do u mean??

Oct 10, 2003 | 10:41 AM

cnk

Registered User

Joined: Feb 2003

Posts: 49

There are green brackets that cover the injectors. They are used so that in the event of an accident, the injectors don't pop out and spray fuel everywhere. They are difficult to remove, but as long as you're patient and keep at it, you'll be able to wiggle them out. Most people don't put them back in afterwards.

Calvin

Oct 10, 2003 | 03:43 PM

tk1971

Registered User

Joined: Jan 2003

Posts: 31

From: So Cal

Car Info: 2002 WRX

Your passenger side one also helps hold up your coolant fill tank. Plus, it is where the power steering (I think) hose support is bolted onto as well.

Good luck.

Oct 11, 2003 | 05:13 PM

jigga

Registered User

Joined: Nov 2002

Posts: 174

From: Ontario

Car Info: 02 wrx

hahaha! The green brackets of death! I remember when I did the injector swap too... It took 2 hours to do one side, and anonther 3 hours to do the other side.... not much fun..... I did put the shields back on at the end though, just to keep the car looking as stock as possible...