NX n-tercooler sprayer

Reply Subscribe

Thread Tools

Search this Thread

Oct 26, 2003 | 03:27 PM

lettucemanatee

Guest

Posts: n/a

NX n-tercooler sprayer

has anyone used the nitrous express C02 intercooler sprayer to lower intake temps on a stock rex? praise? complaints? i'm looking into modding my car lightly right now, nothing to change turbo or internals, just exhaust maybe the n-tercooler sprayer, and a UTEC.

Oct 26, 2003 | 05:33 PM

Kevin M

Registered User

iTrader: (12)

Joined: Nov 2002

Posts: 18,369

From: Reno, NV

Car Info: 1993/2000/2001 GF4 mostly red

It's designed to cool the intercooler and increase it's efficiency, not cool the intake charge directly. As it is, the factory intercooler is hard to beat at near-stock power levels. You can't really do much better than getting the charge back to within 12-15 degrees F of ambient.

Oct 26, 2003 | 07:35 PM

lettucemanatee

Guest

Posts: n/a

here in new orleans, the summers are very humid and hot. in traffic, which there is a lot of, the engine runs a little hotter and seems a just a tad bit more sluggish (this could just be mental). you think it would be a well used investment? or just a complete waste of the money with no actual purpose

Oct 27, 2003 | 12:30 PM

Salty

VIP Member

iTrader: (14)

Joined: May 2003

Posts: 8,675

From: Wherever Sucks the Most

Car Info: 2003 WRX, 2008 Camry

Quote:

Originally posted by lettucemanatee
here in new orleans, the summers are very humid and hot. in traffic, which there is a lot of, the engine runs a little hotter and seems a just a tad bit more sluggish (this could just be mental). you think it would be a well used investment? or just a complete waste of the money with no actual purpose

It's worth a shot. however, i'd try a DIY intercooler sprayer first for cheap and see if that does the trick. I know how hot it gets in LA... i used to live in the a$$hole of the USA... AKA ft.polk. LOVED New Orleans though

Oct 28, 2003 | 07:47 AM

WRXshagnWGN

Guest

Posts: n/a

you can make one there pretty easy. all that you need is some stainless fuel rail, a CO2 tank, nitrous solenoid, and some braided fuel line, oh and a switch of course.