No boost
No boost
Yesterday while I was driving home I lost almost all of my boost. The turbo will only spool up to about 5 psi not enough to open the blow off valve. Anybody have a problem like this?
VIP Member
Joined: Nov 2003
Posts: 1,684
From: Are you too one of the few still living the past? Well I can change that! With a simple wicket. Yes, my friend, a wicket. PM for details.
Car Info: No car right now....sob.
Check your exhaust....possible uppipe leak?
I fixed it
I finaly figured out what the problem was. it was a bad wastegate control solenoid valve.
if you want to check if this is the same problem your having. disconnect the vac line off the wastgate controler. and take it for a LITE drive around the block with it disconnected. you will be at max boost so take it easy & dont get addicted to the power. if you get max boost the problem is your wastegate control solenoid.
solution buy a boost controler & hook it oh so the factory controler is out of the loop
this was just the problem I had I am not saying thatyour situation will be the same
if you want to check if this is the same problem your having. disconnect the vac line off the wastgate controler. and take it for a LITE drive around the block with it disconnected. you will be at max boost so take it easy & dont get addicted to the power. if you get max boost the problem is your wastegate control solenoid.
solution buy a boost controler & hook it oh so the factory controler is out of the loop
this was just the problem I had I am not saying thatyour situation will be the same
Thread
Thread Starter
Forum
Replies
Last Post
yzercyber
Suby Shopping & Maintenance/Warranty
11
Aug 12, 2005 03:42 PM
Astacun1
Engine/Power - EJ20T (pre-2006 WRX and JDM)
1
Jun 28, 2003 03:12 PM
mattr762
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
Apr 18, 2003 09:12 AM
XwrxX
Aftermarket Forced Induction - Turboed factory NA engines
0
Dec 17, 2002 07:14 AM



