Engine/Power - EJ20T (pre-2006 WRX and JDM) There is replacement for displacement, it is forced induction - OEM 2.0 liter turbo engines in the USDM WRX. 90-94 Legacy Turbo EJ22 turbo engines can also be discussed here.

Make Me Fast

Thread Tools
 
Search this Thread
 
Old Nov 1, 2004 | 07:37 PM
  #2  
sonic_yellow's Avatar
Registered User
iTrader: (13)
 
Joined: Nov 2003
Posts: 1,011
From: Sunny San Diego
Car Info: 03' Subaru Impreza WRX - R.I.P.
why don't you try the search function?
Old Nov 1, 2004 | 07:49 PM
  #3  
teck7droid's Avatar
Registered User
iTrader: (1)
 
Joined: Dec 2002
Posts: 187
From: so cal
Car Info: 03 pearl black wrx
put nawsssss dawg. and boost at least a fp green at 35psi. youll run 10's i say
Old Nov 1, 2004 | 09:17 PM
  #4  
wrx10404's Avatar
Registered User
iTrader: (2)
 
Joined: Dec 2003
Posts: 647
Car Info: 04' wrx
2.2 liter, FP green, STi gears(5 or 6mt swap), EM, All other related small parts(ie. Radiator(pwr),slicone hoses, big injectors, full exhaust(Up/down and headers),big intercooler,and lots of other goodies.) This should safely let you run 23 psi. This is probably at least 20k in parts. That outa get you started. I am not an expert by any means but this probably would be good. Hell i will be happy if my WRX runs high 12's and i canm drive it every day. If i had unlimited cash this is what i would do.
Old Nov 4, 2004 | 12:54 AM
  #5  
namakemono's Avatar
Registered User
iTrader: (3)
 
Joined: Sep 2003
Posts: 4,499
From: town / kaneohe
Car Info: gc w/ neons and a wrx that needs neons
just buy the easystreet stage 4 or the high stages from vishnu/turboxs
Old Nov 4, 2004 | 01:46 AM
  #6  
sigma pi's Avatar
9 to 5 mod
iTrader: (6)
 
Joined: Jan 2003
Posts: 57,389
From: Chavez Ravine
Car Info: 03 Impreza WRX
Engine Parts:



Crawford Performance Race Motor

ARP Head Studs
Heads Ported and Polished by DPR
Power Enterprise 800 cc injectors
Perrin Fuel Rails (Custom Fuel Lines, Perrin lines are way too small)
Aeroquip Lines and Fittings
GT SPEC Turbo Manifold (Ceramic Coated)
Custom Up Pipe (Ceramic Coated)
Garrett TO4R Turbo (Ceramic Coated)
Tial 40 mm Waste gate
Tial 50 mm BOV
Dual Walbro 255 Fuel Pumps
Aeromotive Fuel Pressure Regulator
Autometer Fuel Pressure Gauge
Perrin Radiator Hoses
Custom Air/Water Intercooler made by me (Ceramic Coated)
Custom 3.5 gallon Water Tank made by me ( Ceramic Coated)
Custom Heat exchanger made by me
Meziere 20GPM Water Pump
4 Inch Custom Intake with 4 inch K&N
3 Inch Custom Stainless Down pipe
Moroso Radiator Overflow
Russell 1200 GPH Fuel Filter




Electronics:



Taylor Battery Box
Autronic Sm2 ECU

Greddy Boost Controller
Blitz DC Gauges
Blitz Turbo Timer
Moroso Battery Disconnect

there you go

you can see my car at http://www.nickslife.net/page/page/1001283.htm
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Heavy Dan
Engine/Power - non turbo (All non turbo Imprezas)
7
Jun 17, 2004 02:56 PM
AWDball
Aftermarket Forced Induction - Turboed factory NA engines
0
Dec 17, 2002 12:07 PM
integlspwr
Hawaii
61
Dec 15, 2002 11:33 AM




All times are GMT -7. The time now is 09:38 PM.