I am installing my stock BOV and one of the hoses came out, so quick question to anyone who can help. The thin hose goes directly into the manifold? I see a hole where the hose can go from the stock BOV into the manifold... I did some research and saw that the hose went into a split, but I don't see that on my 05 wrx anywhere. SO right now I have the big hose connected , and the BOV mounted, but the little nipple with the hose is where I am lost. I don't know where the end should go...

thanks for any replies

 

If you are replacing an existing aftermarket bov with the oem stock bov, it should be just reinstalling the t-fitting that should be located to the right of the bov.

 

yup... thats the thing. i dont see any T fittings... i just have one hose that "I THINK" came off the manifold... =\ should i be worried if there is no T shaped hosing?

 

no actually. I screwed up. I have a t fitting on mine because I'm running a boost gauge so i need the t fitting to connect a vacuum line. Sorry for the bad info!

 

i think i got it installed... but one question is... i found a little oil just in the hose from the tmic hose... is that normal? and the vacuum hose that connects to the BOV right under the tmic hose