having a problem....any ideas?
#1
Guest
Posts: n/a
having a problem....any ideas?
hey all....THIS IS LONG....SORRY...
well maybe you can help me out....I've been having problems eversince I got the link....my car was running fine after the vf34 and fmic went on.....I brought the car to a well known shop to have my injectors and a Link installed and now the car has "like" missfiring and they couldn't tune her.......so the shop said it was the plugs....I told them to change them.....after that the car was still not right....it like has a studder when the turbo spools up at about 4500 rpm....so they said it might be my fuel pump....I changed the pump, then filter, then cut the cat off, then still not right.....so then they thought I had a boost/vac leak, A friend and i check over all the hoses and IC piping and find the fuel press reg is bad....so I put in a Sard fuel press reg and still have the problem.....now I'm getting fed up after spending over 2 months and all extra $ plus the $ for the link and injectors that I don't know what to do, so I did a compression check and pulled out the plugs, I put in denso ik-22's in 1 step colder and know she don't miss but there is NO POWER. the turbo spools up but I'm not going anywhere......any ideas? maybe the coils?.....I really don't want to limp it back to the shop like this.....I think that it should be up to the shop that did the work be responsable and fix it, but I really don't want to drive it like this for over an hour to get there....
well maybe you can help me out....I've been having problems eversince I got the link....my car was running fine after the vf34 and fmic went on.....I brought the car to a well known shop to have my injectors and a Link installed and now the car has "like" missfiring and they couldn't tune her.......so the shop said it was the plugs....I told them to change them.....after that the car was still not right....it like has a studder when the turbo spools up at about 4500 rpm....so they said it might be my fuel pump....I changed the pump, then filter, then cut the cat off, then still not right.....so then they thought I had a boost/vac leak, A friend and i check over all the hoses and IC piping and find the fuel press reg is bad....so I put in a Sard fuel press reg and still have the problem.....now I'm getting fed up after spending over 2 months and all extra $ plus the $ for the link and injectors that I don't know what to do, so I did a compression check and pulled out the plugs, I put in denso ik-22's in 1 step colder and know she don't miss but there is NO POWER. the turbo spools up but I'm not going anywhere......any ideas? maybe the coils?.....I really don't want to limp it back to the shop like this.....I think that it should be up to the shop that did the work be responsable and fix it, but I really don't want to drive it like this for over an hour to get there....
Last edited by sweetwrx; 12-01-2002 at 02:37 PM.
Thread
Thread Starter
Forum
Replies
Last Post
stbolster
Interior, Exterior & Lighting
2
02-27-2009 12:02 PM