Greddy oil Block question?

Reply Subscribe

Thread Tools

Search this Thread

Mar 7, 2003 | 03:46 PM

4npower

Guest

Posts: n/a

Greddy oil Block HELP!!!!!

Has anyone installed the Greddy oil block. It's the Adapter for temp or pressure the goes where the oil filter goes and the filter screws into it ? If you've installed one help.
Thanks

Last edited by 4npower; Mar 8, 2003 at 10:19 PM.

Mar 9, 2003 | 08:54 PM

4npower

Guest

Posts: n/a

^BUMP^ HELP PLEASE

Mar 10, 2003 | 11:33 AM

cnstman

Registered User

Joined: Nov 2002

Posts: 46

From: Colorado Springs

Car Info: 2004 Silver/Silver STi

what is your question??

Mar 10, 2003 | 03:24 PM

BlueDemon

Guest

Posts: n/a

To answer your question, yes I have installed it, and it is currently on now.

Now ask your REAL question.

Blue

Mar 10, 2003 | 09:08 PM

4npower

Guest

Posts: n/a

Kewl how hard was it to install it looks simple but when i took it out of the package and screwed the (filter adapter) 2 pieces in to the middle of the block there is a slight up and down movement is it normal. ALso have you had any problems with it ? Leaking oil, ect.
and what type of filter and oil are you using.

Thanks

Mar 10, 2003 | 09:43 PM

cnstman

Registered User

Joined: Nov 2002

Posts: 46

From: Colorado Springs

Car Info: 2004 Silver/Silver STi

mine was simple to install. i am using dyno oil 5 w 30, and the normal subaru oil filter. have had it in for 4000 miles or so and not one leak. no up/down movement when it is installed and tight.

cnstman

Mar 11, 2003 | 08:13 PM

4npower

Guest

Posts: n/a

KEWL KEWL thanks alot i only worried b\c i tred to run a FRAM but 8 months ago and it leaked like heell so i was praying this wouldnt do it . THANKS AGAIN