i bought my helix uppipe and downpipe from gruppe-s and they included the cell fixture with the purchase. they gave me instructions but it's almost confusing me more as i look at them and try to figure out what it all means.

how does the installation process work. i'm assuming i can just twist in the new wires in with the old wires and cover them with electrical tape? and another thing im wondering about is when i return the car to stock set up for emissions testing...do i need to remove the cell too?

thanks

 

For the uppipe fix all you need to do is remove the boost solenoid cover, unplug the connector that goes to the egt sensor(usually the bottom one) and install the resister to bridge the disconection from the egt sensor to the ecu.