I saw this item on ebay

http://cgi.ebay.com/ebaymotors/ws/eB...category=34203

has anyone tried it? Any feedback?

 

overpriced... the bolt and resistor are for the up-pipe egt fix if you removed the probe.

the other thing is actually 2 18mm spark plug non-foulers screwed together, it's like $3 in parts from pep boys. simply drill one of them out with a 1/2" drill bit to give clearance for the o2 sensor and screw that into the untouched one. and yes, this one works great. it places the sensor far enough out of the exhaust flow to register enough difference between the 2 o2 sensors and the ecu thinks everything it just fine.

 

Dooo it! I actually just rigged my dp with this pepboys setup a few weeks ago and it seems to be working just dandy.

 

ill give it a try, thanks!

 

i got those on ebay last month they work fine no cel for about 1000k so it works very good instruction and details the guy that is selling it is very nice to just get it you will be happy....

 

Finally got a chance to do the CEL fix (2 spark plug non foulers) on a Perrin dp and there is barely enough clearance for the o2 sensor to fit. I had to play with the down pipe to get it to fit right. I could not put back the bolt that holds up the stock cat pipe. Is this normal? My car is lowered so I'm worried the pipe might hit a bump, if its big enough.

 

Did your Perrin dp only delete one of the cats then? You still have your stock third cat?

 

no, it deleted both. I also noticed a small leak with the stock midpipe. I guess the stock 3rd cat had a donut looking gasket. I guess I should have used 2 aftermaket gasket. that or get an aftermarket midpipe.