catless mid-pipe?????
Guest
Posts: n/a
catless mid-pipe?????
ok guys.....i need some help........
i have a godspeed downpipe, and a flowmaster catback, i need to find a company that makes a mid-pipe that will fit in between those two. both match up withg the stock exhaust.....so i need a midpipe that mates up with the stock stuff.
who makes one and what does it cost?????
later, riggs
i have a godspeed downpipe, and a flowmaster catback, i need to find a company that makes a mid-pipe that will fit in between those two. both match up withg the stock exhaust.....so i need a midpipe that mates up with the stock stuff.
who makes one and what does it cost?????
later, riggs
Registered User
iTrader: (8)
Joined: Jun 2003
Posts: 823
From: yea! over there!
Car Info: white 03 sedan
just gutt out your stock 3rd cat...it's really not that hard...took me a near 10 minutes to do...just get yourself a pipe(i used the pipe from my 3-ton jack), and a hammer, and start whacking them kittens
...within 10 mintues, you have a catless mid-pipe:banana:
...within 10 mintues, you have a catless mid-pipe:banana:
VIP Member
Joined: Feb 2003
Posts: 488
From: 12.9 / 105+
Car Info: black my03 5mt wrx s/w
gut a spare stocker.
got mine for 25 shipped. literally less than a half-hour's worth of work... it is CONSIDERABLY easier than gutting the up pipe, since the MP's cat is a ceramic substrate, not aluminum.
jm2c
ken
got mine for 25 shipped. literally less than a half-hour's worth of work... it is CONSIDERABLY easier than gutting the up pipe, since the MP's cat is a ceramic substrate, not aluminum.
jm2c
ken
Registered User
iTrader: (14)
Joined: Jan 2003
Posts: 1,224
From: Honolulu, HI
Car Info: 1991 Toyota MR-2 Turbo
This might work:
http://www.daddysscp.com/
I like the heatshield they put on it. Looks like it actually has a cat on it but it doesn't
.
http://www.daddysscp.com/
I like the heatshield they put on it. Looks like it actually has a cat on it but it doesn't
.
VIP Member
iTrader: (14)
Joined: May 2003
Posts: 8,675
From: Wherever Sucks the Most
Car Info: 2003 WRX, 2008 Camry
Originally posted by Mister 2
This might work:
http://www.daddysscp.com/
I like the heatshield they put on it. Looks like it actually has a cat on it but it doesn't.
This might work:
http://www.daddysscp.com/
I like the heatshield they put on it. Looks like it actually has a cat on it but it doesn't
.
That has to be one of the most ghetto midpipe's i've seen. You might as well take off the OEM heat sheilds and weld them on yourself.
Eric
Registered User
iTrader: (14)
Joined: Jan 2003
Posts: 1,224
From: Honolulu, HI
Car Info: 1991 Toyota MR-2 Turbo
Originally posted by Sisqocqk
LOL
That has to be one of the most ghetto midpipe's i've seen. You might as well take off the OEM heat sheilds and weld them on yourself.
Eric
LOL
That has to be one of the most ghetto midpipe's i've seen. You might as well take off the OEM heat sheilds and weld them on yourself.
Eric
VIP Member
iTrader: (14)
Joined: May 2003
Posts: 8,675
From: Wherever Sucks the Most
Car Info: 2003 WRX, 2008 Camry
Originally posted by Mister 2
Well Eric can you suggest some others that aren't as "ghetto"?
Well Eric can you suggest some others that aren't as "ghetto"?
Your post seems a bit confusing
Is the flowmaster a catback or axleback and are you talking about the midpipe or the resinator pipe because it sounds like you're talking about the resinator.
Last edited by Salty; Feb 9, 2004 at 03:44 PM.
Registered User
iTrader: (14)
Joined: Jan 2003
Posts: 1,224
From: Honolulu, HI
Car Info: 1991 Toyota MR-2 Turbo
??? you talking to me???
Sounds like the originator of this thread (riggs) has a downpipe which replaces just the #2 cat and a cat back exhaust system. All he's looking for is something to replace the #3 cat. Does the TXS catless racepipe work with other dps and catbacks?
Sounds like the originator of this thread (riggs) has a downpipe which replaces just the #2 cat and a cat back exhaust system. All he's looking for is something to replace the #3 cat. Does the TXS catless racepipe work with other dps and catbacks?
VIP Member
iTrader: (14)
Joined: May 2003
Posts: 8,675
From: Wherever Sucks the Most
Car Info: 2003 WRX, 2008 Camry
Originally posted by Mister 2
??? you talking to me???
Sounds like the originator of this thread (riggs) has a downpipe which replaces just the #2 cat and a cat back exhaust system. All he's looking for is something to replace the #3 cat. Does the TXS catless racepipe work with other dps and catbacks?
??? you talking to me???
Sounds like the originator of this thread (riggs) has a downpipe which replaces just the #2 cat and a cat back exhaust system. All he's looking for is something to replace the #3 cat. Does the TXS catless racepipe work with other dps and catbacks?
eric
Guest
Posts: n/a
ok........now i'm confused....and my head hurts from thinking.
how many pipes make up the stock exhaust????? and in what order do they go?????? i'm gonna start from scratch so i get this right!
i wanted to get rid of the third cat! that way i'll get the most out of my stage 2. where the hell is the resinator box in the exhaust????
help me out here........
later, riggs
how many pipes make up the stock exhaust????? and in what order do they go?????? i'm gonna start from scratch so i get this right!
i wanted to get rid of the third cat! that way i'll get the most out of my stage 2. where the hell is the resinator box in the exhaust????
help me out here........
later, riggs